Catalyst 6500 Series Switches Installation Guide - Ipland

Chassis Installation Kits and Cable Guides
Chapter 3
Installing the Switch
Table 3-2
Chassis Installation Kits and Cable Guides (continued)
Chassis
Catalyst 6506 and
Catalyst 6506-E
Catalyst 6509 and
Catalyst 6509-E
Installation Kits and Cable Guides
• Standard 19-inch rack-mount L brackets (factory-installed on the
chassis). Associated rack-mounting hardware is included in the
accessory kit.
• 3 RU rack-mount shelf kit is included in the accessory kit.
• Two 6-slot cable management guides are included in the accessory
kit.
• Catalyst 6506-E only—Rubber feet installation kit is included in
the accessory kit. (The kit is used when installing the chassis as a
freestanding unit on a table or shelf.)
Note An optional center rack-mount kit for 23-inch, telco-style racks
is available for both of these chassis. The kit is not included as
part of the standard accessory kit, but is available as a
separately orderable item (WS-C6597=). Installation
instructions are included with the kit.
• Standard 19-inch rack-mount L brackets (factory-installed on the
chassis). Associated rack-mounting hardware is included in the
accessory kit.
• 3 RU rack-mount shelf kit is included in the accessory kit.
• Two 9-slot cable management guides are included in the accessory
kit.
• Catalyst 6509-E only—Rubber feet installation kit is included in
the accessory kit. (The kit is used when installing the chassis as a
freestanding unit on a table or shelf.)
Note An optional center rack-mount kit for 23-inch, telco-style racks
is available for both of these chassis. The kit is not included as
part of the standard accessory kit, but is available as a
separately orderable item (WS-C6597=). Installation
instructions are included with the kit.
Catalyst 6509-NEB • Standard 19-inch rack-mount L brackets (factory-installed on the
chassis). Associated rack-mounting hardware is included in the
accessory kit.
• 3 RU rack-mount shelf kit is included in the accessory kit.
• Stabilizer bracket installation kit is included in the accessory kit.
(The kit is required when installing the chassis as a freestanding
unit.)
• One cable management guide is included in the accessory kit.
3-6
Catalyst 6500 Series Switches Installation Guide
OL-5781-08