POISE-SkyLite User Guide - Palmer College of Chiropractic, Intranet ...

INTRODUCTION CHAPTER 1
See page 17.
See page 49.
3. Configure AutoConnect
Click on the AutoConnect tab and check the Start Session When Application Starts box
(do not click OK).
This will connect you to your session logon screen whenever you open the session. You
can also set up a session to automatically log on using a macro.
4. Select the appropriate network and emulation
Click on the Session tab; then highlight the appropriate network and emulation, in this
case Windows Sockets and DEC VT320. Configure, either by double-clicking on the
selected network, or by clicking on the Properties button.
See page 41.
See page 46.
See page 18.
5. Configure the network and emulation
In the Configure Windows Sockets dialog:
• Configure your network by typing in the Host Address.
• Configure your emulation by clicking on the DEC VT320 tab and setting the
Display Mode and Screen Size.
• Click on OK when finished.
Chapter 3, Networks and Emulations, describes how to configure networks and
emulation settings.
Your session screen should now appear.
6. Save the session
To save your session you can either:
• Select Save as from the Session menu, or
• Click the toolbar button shown on the left.
Enter the name in the file Name field. You can choose an image from the pull-down list
box that will be associated with the session name.
The session will be saved, with a .ses file extension, in your SkyLite directory.
You can create a shortcut in your Windows desktop as follows:
In Windows Explorer, find the .ses file you have just created and highlight it by clicking
once. From the File menu, select Create Shortcut. Drag the shortcut icon you have
created onto your desktop. This will create an icon on your desktop which will give you
direct access to the session you created.
10 POISE-SkyLite User Guide