SHIPLAP DURAPLATE LOWER HORIZONTAL PANEL SPLICE ...

®
Shiplap DuraPlate Lower Horizontal Panel Splice
Remove the Galvanized Scuff Liner from Inside
1. Equipped with an air impact gun and chisel tip, cut off the rivet button
heads inside along the top of the galvanized scuff liner the full length of
the trailer (Figure 3).
2. Cut off the rivet heads at the front corner post vertical seam up 24", and
again at the rear corner post seam up 24". This completely detaches the
scuff liner.
3. Using the chisel-tipped impact gun between the scuff liner and the wall
panel, remove the scuff liner by peeling it away from the inner wall,
moving toward the front. Set the length of galvanized liner aside
for reinstallation.
4. As the mechanic is down in position cutting the scuff liner rivets, it may be
easier to also shear the rivet heads along the three lower rows of base
rail attaching rivets.
Figure 3, Removing Scuff Liner
5