SHIPLAP DURAPLATE LOWER HORIZONTAL PANEL SPLICE ...

®
Shiplap DuraPlate Lower Horizontal Panel Splice
Labor Requirements
Replacing the lower portion of a full 52 ft. side wall requires at least four
qualified mechanics working together with the proper tools and equipment,
as outlined in this procedure. Hours required for the complete job include
reinstalling the scuff liner and adding conspicuity stripes along the base rail.
This will take roughly 30 man hours per side. This procedure and associated
videotape are based on proven methods for completing this job.
NOTE: Due to the many variations in models and sizes, customers can
order the correct replacement material to specification by trailer serial
number from WNC Parts.
List of Materials
• Replacement Logistic DuraPlate side panel
• E7973120–Outside Splice Aluminum Extrusion (4 at 26 ft.)
• 01A01844–Inside Splice Aluminum Extrusion (punched, 4 at 26 ft.)
• 01107142–Outside Batten Strip, punched (8 per side)
• 01107186–Inside Batten Strip, not punched (8 per side)
• 21000120–Sealant Caulk Sika-Flex #227, white (2 tubes per side)
• 21100083–PVC foam tape, 1 /16" thick x 3 /4" W (2 rolls per side)
• BRV00005–Rivet 1 /4"D x 11 /16"L, Brazier Head, 2117-T4 (1.22 lbs.)
• BRV00112–Rivet 1 /4"D x 13 /16"L, Brazier Head, 2117-T4 (13.5 lbs.)
• BRV00026–Rivet 1 /4"D x 7 /8"L, Brazier Head, 2117- T4 (.4 lbs.)
• BRV00092–Rivet 1 /4"D x 1"L, Brazier Head, 2117-T4 (.69 lbs.)
• 25000781–Conspicuity Tape, 2" W x 7" white/11" red ( 3 /8 of a roll per trail)
2