SHIPLAP DURAPLATE LOWER HORIZONTAL PANEL SPLICE ...
SHIPLAP DURAPLATE LOWER HORIZONTAL PANEL SPLICE ...
SHIPLAP DURAPLATE LOWER HORIZONTAL PANEL SPLICE ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
®<br />
Shiplap DuraPlate Lower Horizontal Panel Splice<br />
Installing the Vertical Seam Batten Strips<br />
1. Two batten strips have been supplied: one with holes and one without.<br />
This will eliminate having to align rivet holes blindly between the outside<br />
and inside seams. Apply foam tape to the backside of the outside batten<br />
strips with holes (01107142). Reference attached drawing 01000698 for<br />
installing the foam tape in two separate rows, top to bottom.<br />
2. Measure to one side of the splice seam 1- 1 /4" and make a reference mark<br />
top and bottom for aligning the batten strip evenly over the splice seam.<br />
3. Apply the outside batten strips over each vertical seam. Note the foam<br />
tape will temporarily hold the strips in place until drilled and 1 /4" rivets<br />
are installed.<br />
Figure 16, Caulking the Vertical Seams<br />
17
Change language