instruction book - Janome
instruction book - Janome
instruction book - Janome
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PROBLEMS AND WARNING SIGNALS<br />
When beep sounds and the LED display shows warning signal, follow the guidance below to deal with.<br />
Visual signal<br />
LED<br />
Cause and Action<br />
The foot control has been disconnected while sewing.<br />
Turn OFF the power and connect the foot control.<br />
A button is pressed when the machine halts due to the overload.<br />
Wait for at least 15 seconds to recover.<br />
If thread jamming causes overload, remove the tangled threads.<br />
Pattern selection key is pressed after buttonhole is finished but the foot is not raised.<br />
Raise the foot.<br />
Do not use the automatic buttonhole foot to sew any other pattern than buttonhole or darning.<br />
The machine is out of order.<br />
Contact the service center or the store from whom the machine was purchased.<br />
Audible Signal<br />
Beep<br />
Beep sounds when:<br />
pip<br />
Normal operation<br />
pip-pip-pip<br />
Invalid operation<br />
pip-pip-peep<br />
Buttonhole is finished.<br />
peep<br />
The machine is out of order.<br />
48