instruction book - Janome

1 2 3
01
0
Auto
9
Rolled Hem
Machine setting
1 Pattern #01
2 Foot
D: Rolled hem foot
3 Thread tension Auto
1
4
1
2
3
1
Trim off the corner of the fabric 0.5 cm (3/16˝) by
0.8 cm (5/16˝) to avoid a bulkiness of the hem at the
corner.
Fold the fabric edge twice 0.3 cm (1/8˝) wide and 6 cm
(2 3/8˝) long.
1
2
3
4
Wrong side of the fabric
0.5 cm
0.8 cm
Curl of the foot
2
2
Place the fabric aligning the hem edge with the guide
on the foot. Lower the foot and sew several stitches
while pulling both threads to the back.
Stop the machine with the needle in the fabric and
raise the presser foot. Insert the folded portion of the
fabric into the curl of the foot.
Lower the foot and sew while lifting up the fabric edge
to keep it feeding smoothly and evenly.
1 2 3
22
0
Auto
9
Eyelet
Machine setting
1 Pattern #22
2 Foot
F: Satin stitch foot
3 Thread tension Auto
Depress the foot control and the machine will sew an
eyelet and stop automatically.
Open the eyelet with a small awl or punch.
If the eyelet opens or overlaps when sewing on certain
materials, correct it by pressing stitch length adjustment
keys as follows:
Press the minus (–) key if the eyelet is open (The LED
display shows “ L1 ”).
Press the plus (+) key if the eyelet overlaps (The LED
display shows “ L3 ”).
NOTE: The default setting is “ L2 ”.
36