instruction book - Janome
instruction book - Janome
instruction book - Janome
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1<br />
16<br />
Sensor<br />
2<br />
0<br />
3<br />
Auto<br />
9<br />
Corded Buttonholes<br />
Machine setting<br />
1 Pattern #16<br />
2 Foot<br />
R: Automatic buttonhole foot<br />
3 Thread tension Auto<br />
1<br />
1<br />
With the buttonhole foot raised, hook the filler cord on<br />
the cord spur on the back of the buttonhole foot.<br />
Bring the ends toward you under the foot, and hook<br />
the filler cord into the forks on the front of the foot to<br />
hold them tight.<br />
1<br />
3 2<br />
1<br />
2<br />
3<br />
Spur<br />
Forks<br />
Cord<br />
3<br />
2<br />
2<br />
Lower the needle into the garment where the<br />
buttonhole will start by turning the handwheel and<br />
lower the foot. Depress the foot control and sew the<br />
buttonhole over the cord.<br />
6<br />
7<br />
4<br />
5<br />
NOTE: The sewing sequence is the same as the<br />
automatic buttonhole.<br />
4 Needle thread<br />
5 Bobbin thread<br />
6 Buttonhole mark<br />
7 Starting point<br />
3<br />
3<br />
Remove the fabric and pull the left end of the cord to<br />
tighten it. Cut the excess cord.<br />
32