Telemetry Module MT-021 User Manual

For example to enable authorization for eighth and ninth phone on the list you need
to set parameter to 80010000 (10000000 00000001 00000000 00000000 in binary
notation).
2.) Information about days of month is stored in one 32-bit digit, in which each single
bit corresponds to one day of month according to table below:
Bit
position
Day of
month
Bit
position
Day of
month
31
(M
SB)
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
8 7 6 5 4 3 2 1 16 15 14 13 12 11 10 9
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
24 23 22 21 20 19 18 17 All 31 30 29 28 27 26 25
0
(LS
B)
For example to enable timer for first and last day of month (30th and 31st) you need
to set parameter to 1000060 (00000001 00000000 00000000 01100000 in binary
notation).
Examples:
Setting new value of SIM card PIN number (0101) and new Configuration password
(ADMIN):
&#SPIN="0101"#SMSP="ADMIN"
Module response:
>#SPIN="0101"#SMSP="ADMIN"
Attention!!! All changes to SIM card PIN number and Configuration password
parameters are taking effect after module restart.
Reading telephone number stored on second position on Authorized
numbers->Phone list:
&ADMIN#SMSN_2
Module response:
>#SMSN_2="+48111222333"
Number on this position is +48 111 222 333.
Setting new phone number (+48 123 456 789) on second position on Authorized
numbers->Phone list:
&ADMIN#SMSN_2="+48123456789"
Module response:
>#SMSN_2="+48123456789"
Setting new phone number on sixth position on Authorized numbers->Phone list.
Name parameter is Mark and Number parameter is +48 987 654 321:
78