Telemetry Module MT-021 User Manual
Telemetry Module MT-021 User Manual
Telemetry Module MT-021 User Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Default value - None<br />
Comments - N/A<br />
6.2.7.4.1. Trigger input<br />
Function - select flag of analog input which can trigger event<br />
Data type - selection list<br />
Range - AN1, AN2<br />
Default value - AN1<br />
Comments - N/A<br />
6.2.7.4.2. Trigger condition<br />
Function - Defines the alarm flag associated with the selected<br />
analog input and used to trigger an event<br />
Data type - selection list<br />
Range - Alarm HiHi, Alarm Hi, Alarm Lo, Alarm LoLo<br />
Default value - Alarm HiHi<br />
Comments - N/A<br />
6.2.7.5. Trigger source (inputs 1-WIRE)<br />
Function - defines resource to trigger event<br />
Data type - selection list<br />
Range - None<br />
Inactive event<br />
Binary inputs<br />
Events associated with binary inputs I1 ... I4<br />
Analog inputs<br />
Events associated with analog inputs AN1, AN2<br />
Inputs 1-WIRE<br />
Events associated with 1-WIRE inputs<br />
Clocks<br />
Events associated with TMR1...TMR4 timer flags<br />
Flags<br />
Events generated by the system/internal<br />
processor<br />
Counters<br />
Events associated with counter's flags<br />
Connections<br />
Events associated with incoming telephone calls<br />
Default value - None<br />
Comments - N/A<br />
6.2.7.5.1. Trigger input<br />
Function - select flag of 1-WIRE input which can trigger event<br />
Data type - selection list<br />
53
Change language