Telemetry Module MT-021 User Manual

6.2.6.2.1.3. Days of week
Function - defines days of week when the timer is active
Data type - Multiple choice field
Range - Mo.,Tu.,We.,Th.,Fr.,St.,Sn.
Default value - Mo.,Tu.,We.,Th.,Fr.,St.,Sn. (all week days selected)
Comments - The timer's activity is depending on logical sum of days of
week and days of month. Selecting all week days will make
the timer active all of the time. If no days of week are
selected the activity of the timer will depend only on days of
month selection.
6.2.6.2.1.4. Days of month
Function - Selects days of month when the timer is active.
Data type - Multiple choice field
Range - 1, 2, … 30, 31, Last
Default value - No day selected (none of month days is selected)
Comments - The timer's activity is depending on logical sum of days of
week and days of month. Selecting all month days will make
the timer active all of the time. If no days of month are
selected the activity of the timer will depend only on days of
week selection.
6.2.6.3. State logging
Save status Subgroup contains parameters for defining messages (which may include
the current states of inputs and outputs) periodically saved in the event logger of
MT-021 module. This allows to periodically record measured values.
6.2.6.3.1. Start [HH:MM]
Function
- Defines the synchronization point of period of logging device
state to event logger with RTC clock
Data type
- time
Range - 00:00 - 23:59
Default value - 00:00
Comments -
6.2.6.3.2. Period
Function
- Defines interval of saving user-defined message in the event
logger of MT-021 module
Data type
- selection list
Range - 10 min., 20 min., 30 min., 45 min., 1 hour, 2 hours, 3 hours, 4
hours, 6 hours, 8 hours, 12 hours, 24 hours
Default value - 6 hours
Comments -
50