Telemetry Module MT-021 User Manual

6.2.6.1.2.1. Name
Function - Defines output's user friendly name
Data type - Text
Range - Letters and numerals, max 16 characters
Default value - Respectively (Q1...Q4)
Comments - Assigning friendly names facilitates discrimination of
outputs destination and required settings.
6.2.6.1.2.2. Output mode
Function - selection of binary output mode
Data type - selection list
Range - Monostable
binary output is set for time given by Pulse
duration parameter
Bistable
state of output is defined by user
Default value - Monostable
Comments - N/A
6.2.6.1.2.3. Pulse duration [s]
Function - defines length (in seconds) of impulse on binary output in
monostable output mode
Data type - number
Range - 0.1 ... 214748364.7
Default value - 0.1
Comments - N/A
6.2.6.1.2.4. On event
Function - Allows selection of predefined event from the event list,
which is to be used to turn on output.
Data type - selection list
Range - None or names of event from the Events table
Default value - None
Comments - N/A
6.2.6.1.2.5. Off event
Function - Allows selection of predefined event from the event list,
which is to be used to turn off output.
Data type - selection list
Range - None or names of event from the Events table
Default value - None
Comments - Parameter is only available when Output mode is set to
Bistable.
43