Telemetry Module MT-021 User Manual
Telemetry Module MT-021 User Manual
Telemetry Module MT-021 User Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HH - if placed in this format text automatically changed<br />
for current hour in 24h format (e.g. 01),<br />
MN - if placed in this format text automatically changed<br />
for current minutes (e.g. 01),<br />
SS - if placed in this format text automatically changed<br />
for current seconds (e.g. 59).<br />
Example:<br />
Parameter is set to:<br />
Time of measurement: HH:MN:SS<br />
Macro result is (providing the time is 01:01:59):<br />
Time of measurement: 01:01:59<br />
6.2.3.6.3. General format 1<br />
Function - Defines date format used by #RTC predefined symbolic name<br />
and by T1 macro prefix<br />
Data type - Text<br />
Range - 0...31 signs<br />
Default value - YYYY/MM/DD, HH:MN:SS<br />
Comments - In the text user can use symbols available for parameters<br />
Date format i Time format.<br />
6.2.3.6.4. General format 2<br />
Function - Defines date format used by T2 macro prefix<br />
Data type - Text<br />
Range - 0...31 signs<br />
Default value - YYYY/MM/DD, HH:MN:SS<br />
Comments - In the text user can use symbols available for parameters<br />
Date format i Time format.<br />
6.2.3.7. Symbolic names<br />
Symbolic names group contains names assigned by the user referring to the internal<br />
and input registers. There can be defined up to 16 symbolic names.<br />
In order to use a symbolic name in SMS put it name preceded by '#' sign in SMS text<br />
send from mobile phone or defined in Rules/SMS sending or as a component of<br />
user-defined macros. Using symbolic names makes composing SMS text much more<br />
convenient and user friendly.<br />
6.2.3.7.1. Number of symbolic names<br />
Function - declares number of user defined symbolic names.<br />
Data type - number<br />
Range - 1..16<br />
Default value - 1<br />
Comments - N/A<br />
35