Telemetry Module MT-021 User Manual

Comments - The recipient must be previously defined in Authorized
numbers -> Phone.
6.2.3.5.2. SMS limit exceed information
Function - Contains the text of the SMS message sent upon reaching
Daily SMS limit.
Data type - Text
Range - max 160 characters
Default value - empty
Comments - This information is sent beyond standard messages queue and
only once a day. This message does not increment sent
messages counter.
6.2.3.6. Formats
Group Formats contains parameters allowing user to define formats of date and time
presented in SMS messages.
6.2.3.6.1. Date format
Function - Defines date format used by #date predefined symbolic
name and by ld and ud macro prefixes
Data type - Text
Range - 0...31 signs
Default value - YYYY-DD-MM
Comments - In the text user can put any sign combination but predefined
with special meaning listed below:
YYYY - if placed in this format text automatically changed
for year in four digit notation (e.g. 2011),
YY - if placed in this format text automatically changed for
year in two digit notation (e.g. 11),
MM - if placed in this format text automatically changed
for month (e.g. 01 for January),
DD - if placed in this format text automatically changed
for day of month (e.g. 31).
Example:
Parameter is set to:
Date of measurement: YYYY-MM-DD
Macro result is (providing today is 31st of January 2011):
Date of measurement: 2011-01-31
34
6.2.3.6.2. Time format
Function - Defines date format used by #time predefined symbolic
name and by lt and ut macro prefixes
Data type - Text
Range - 0...31 signs
Default value - HH:MN:SS
Comments - In the text user can put any sign combination but predefined
with special meaning listed below: