Telemetry Module MT-021 User Manual

More documents

Recommendations

Info

Yes All SMS messages are sent regardless of the GSM roaming Default value - Answer Comments - In order to be able to sent SMS in roaming the SIM card in the module has to have roaming option active. 6.2.3.3. Number of SMS sending retries Function - Defines max number of retries of failed SMS transmission Data type - Number Range - 0…255 Default value - 10 Comments - After reaching the defined value the SMS is deleted from sending queue. 6.2.3.4. Answer for blank SMS Function - defines the text of reply for empty SMS to the sender. Data type - Text Range - max. 160 characters Default value - *M0 Comments - In replay message text symbolic names may be used following syntax rules defined in Appendices in the Syntax of read and write commands in SMS chapter. 6.2.3.5. SMS limit exceed information text Function - Decides whether the module may send alert that SMS limit was exceeded. Data type - Selection list Range - On module send SMS limit alert to defined phone number of info recipient Off disabled sending SMS limit alert Default value - Off Comments - This information is sent beyond standard messages queue and only once a day. This message does not increment sent messages counter. 6.2.3.5.1. Phone number of info recipient Function - Selects the SMS limit alert recipient Data type - Selection list Range - Authorized numbers list Default value - NUM 1 33
Comments - The recipient must be previously defined in Authorized numbers -> Phone. 6.2.3.5.2. SMS limit exceed information Function - Contains the text of the SMS message sent upon reaching Daily SMS limit. Data type - Text Range - max 160 characters Default value - empty Comments - This information is sent beyond standard messages queue and only once a day. This message does not increment sent messages counter. 6.2.3.6. Formats Group Formats contains parameters allowing user to define formats of date and time presented in SMS messages. 6.2.3.6.1. Date format Function - Defines date format used by #date predefined symbolic name and by ld and ud macro prefixes Data type - Text Range - 0...31 signs Default value - YYYY-DD-MM Comments - In the text user can put any sign combination but predefined with special meaning listed below: YYYY - if placed in this format text automatically changed for year in four digit notation (e.g. 2011), YY - if placed in this format text automatically changed for year in two digit notation (e.g. 11), MM - if placed in this format text automatically changed for month (e.g. 01 for January), DD - if placed in this format text automatically changed for day of month (e.g. 31). Example: Parameter is set to: Date of measurement: YYYY-MM-DD Macro result is (providing today is 31st of January 2011): Date of measurement: 2011-01-31 34 6.2.3.6.2. Time format Function - Defines date format used by #time predefined symbolic name and by lt and ut macro prefixes Data type - Text Range - 0...31 signs Default value - HH:MN:SS Comments - In the text user can put any sign combination but predefined with special meaning listed below:
Page 2 and 3: Telemetry Module MT-021 User Manual
Page 4 and 5: INDEX 1. MODULE'S DESTINATION .....
Page 6 and 7: 6.2.6.1.3.2. Input type ...........
Page 8: 9.2.2. Hearing aids................
Page 11 and 12: 3.2. Power supply MT-021 may be pow
Page 13 and 14: 3.5. Antenna Attachment of antenna
Page 15 and 16: Any of binary inputs I1...I4 may op
Page 17: 3.7.6. Event logger MT-021 automati
Page 20 and 21: In next steps you will see how to c
Page 22 and 23: Create Event EVT1 (in this example
Page 24 and 25: Next press Connect button (Transmis
Page 26 and 27: 5. Connections scheme The chapter s
Page 28 and 29: 5.3. Relay outputs Q1...Q4 Telemetr
Page 30 and 31: Current output sensor 5.5. 1-Wire i
Page 32 and 33: 6.2.1. Header Header of parameter s
Page 34 and 35: 6.2.1.11. Last reading time Functio
Page 38 and 39: HH - if placed in this format text
Page 40 and 41: Default value - 1 Comments - N/A 6.
Page 42 and 43: whether transmission is still possi
Page 44 and 45: 6.2.6.1. Terminals Sub-group Termin
Page 46 and 47: 6.2.6.1.2.1. Name Function - Define
Page 48 and 49: Range Default value Comments - 0...
Page 50 and 51: Data type - number Range - 0...3276
Page 52 and 53: 6.2.6.1.4.2.1.6. Deadband Function
Page 54 and 55: 6.2.6.3.3. Logged information Funct
Page 56 and 57: Default value - None Comments - N/A
Page 58 and 59: 6.2.7.7. Trigger source (Flags) Fun
Page 60 and 61: Default value - Yes Comments - N/A
Page 62 and 63: Default value - Comments - 6.2.8.1.
Page 64 and 65: 6.2.8.2.1. Number of CLIP calls rul
Page 66 and 67: 6.2.8.3.6. SMTP user name Function
Page 68 and 69: 7. Technical Data 7.1. General Dime
Page 70 and 71: 7.7. Drawings and dimensions (All d
Page 72 and 73: 8.2. Unblocking of SIM card Three f
Page 74 and 75: 10.2. Module configuration via SMS
Page 76 and 77: Authorized numbers group: * - index
Page 78 and 79: Synchronous timers TMR1...TMR4 grou
Page 80 and 81: Rules group: * - index from 1 to 16
Page 82 and 83: &ADMIN#LPHN=6#SMST_6="Mark"#SMSN_6=
Page 84 and 85: causes module to write value 1234 t
Page 86 and 87:
UT LD UD T{1..2} S F[1..3] UTC time
Page 88 and 89:
eturned string will look like: >25/
Page 90 and 91:
Address Dec Bit address 0 1 2 3 4 5
Page 92 and 93:
"GSM Status" register flags descrip
Page 94:
10.5. Flags During operation MT-021
show all

Telemetry Module MT-021 User Manual

Create successful ePaper yourself

Delete template?

Save as template?