Telemetry Module MT-021 User Manual

More documents

Recommendations

Info

6.2.1.11. Last reading time Function Data type Range Comments - displays internal module time recorded during last configuration reading or during last time setting - text - compliant with Date and Time format - this field is useful in verifying last access time and checking internal module clock settings (RTC) 6.2.2. General General group encompasses parameters vital for whole module. Contains data necessary for successful login to GSM network and password-protection module configuration. Note: values set here have impact on module's behavior and in worst case, when chosen improperly may even lock the module. 6.2.2.1. SIM card PIN number Function - defines PIN access code for SIM module delivered by GSM operator. For SIM modules not protected by PIN code, the value is insignificant. Data type - Number Range - numerals, from 4 to 8 characters Default value - empty Comments - wrong pin can cause locking of SIM module CAUTION! Caution is vital when setting the PIN code value. Entering faulty PIN code may cause module start-up to be impossible and lock SIM card. In latest versions of the module, attempting to enter wrong PIN code twice renders a third attempt impossible. Procedure in case of blocked module as the result of the wrong PIN value 6.2.2.2. Configuration password Function - defines the password protecting access to configuration of the module. The password will be required for both local and remote access, thus protecting against unauthorized configuration alterations. The password does not protect against reading current configuration or the module status. Data type - text string Range - letters and numerals, max. 32 characters Default value - n/a Comments - since the only way of unlocking the module is resetting it to factory settings, it is vital that the password is stored in a safe way and available when needed. 31
6.2.2.3. Use of GPRS Function - enables GPRS usage required for e-mail sending. Data type - Selection list Range - No GPRS is disabled. Yes GPRS is enabled. Default value - No Comments - When GPRS is enabled new group of parameters called GPRS is visible. 6.2.3. SMS Group SMS contains parameters related to sending and receiving of text messages by <strong>MT</strong>-<strong>021</strong> module. 6.2.3.1. Daily SMS limit Function - Defines max number of SMS, the module may send during one day. The parameter protects against uncontrolled sending of SMS messages and consequent high running expenses. Data type - Number Range - 1…65 535 Default value - 0 = unlimited Comments - N/A ATTENTION! Reaching set by the parameter limit results with unconditional stop of SMS sending. One has to bear in mind that until 00:00 o'clock no messages will be sent even in alarm situations! Unsent due to limitation SMS messages are queued (the queue holds 16 messages) and will be sent when it is possible (after 00:00). If the number of queued messages is higher than the limit set by the user, there is a risk of immediate consuming of the next day limit. 6.2.3.2. Roaming for SMS Function - Decides whether the module may send SMS when roaming in foreign network. Data type - Selection list Range - No When roaming in foreign GSM network no SMS are sent. Answer The module can only respond to queries from authorized numbers 32
Page 2 and 3: Telemetry Module MT-021 User Manual
Page 4 and 5: INDEX 1. MODULE'S DESTINATION .....
Page 6 and 7: 6.2.6.1.3.2. Input type ...........
Page 8: 9.2.2. Hearing aids................
Page 11 and 12: 3.2. Power supply MT-021 may be pow
Page 13 and 14: 3.5. Antenna Attachment of antenna
Page 15 and 16: Any of binary inputs I1...I4 may op
Page 17: 3.7.6. Event logger MT-021 automati
Page 20 and 21: In next steps you will see how to c
Page 22 and 23: Create Event EVT1 (in this example
Page 24 and 25: Next press Connect button (Transmis
Page 26 and 27: 5. Connections scheme The chapter s
Page 28 and 29: 5.3. Relay outputs Q1...Q4 Telemetr
Page 30 and 31: Current output sensor 5.5. 1-Wire i
Page 32 and 33: 6.2.1. Header Header of parameter s
Page 36 and 37: Yes All SMS messages are sent regar
Page 38 and 39: HH - if placed in this format text
Page 40 and 41: Default value - 1 Comments - N/A 6.
Page 42 and 43: whether transmission is still possi
Page 44 and 45: 6.2.6.1. Terminals Sub-group Termin
Page 46 and 47: 6.2.6.1.2.1. Name Function - Define
Page 48 and 49: Range Default value Comments - 0...
Page 50 and 51: Data type - number Range - 0...3276
Page 52 and 53: 6.2.6.1.4.2.1.6. Deadband Function
Page 54 and 55: 6.2.6.3.3. Logged information Funct
Page 56 and 57: Default value - None Comments - N/A
Page 58 and 59: 6.2.7.7. Trigger source (Flags) Fun
Page 60 and 61: Default value - Yes Comments - N/A
Page 62 and 63: Default value - Comments - 6.2.8.1.
Page 64 and 65: 6.2.8.2.1. Number of CLIP calls rul
Page 66 and 67: 6.2.8.3.6. SMTP user name Function
Page 68 and 69: 7. Technical Data 7.1. General Dime
Page 70 and 71: 7.7. Drawings and dimensions (All d
Page 72 and 73: 8.2. Unblocking of SIM card Three f
Page 74 and 75: 10.2. Module configuration via SMS
Page 76 and 77: Authorized numbers group: * - index
Page 78 and 79: Synchronous timers TMR1...TMR4 grou
Page 80 and 81: Rules group: * - index from 1 to 16
Page 82 and 83: &ADMIN#LPHN=6#SMST_6="Mark"#SMSN_6=
Page 84 and 85:
causes module to write value 1234 t
Page 86 and 87:
UT LD UD T{1..2} S F[1..3] UTC time
Page 88 and 89:
eturned string will look like: >25/
Page 90 and 91:
Address Dec Bit address 0 1 2 3 4 5
Page 92 and 93:
"GSM Status" register flags descrip
Page 94:
10.5. Flags During operation MT-021
show all

Telemetry Module MT-021 User Manual

Create successful ePaper yourself

Delete template?

Save as template?