Telemetry Module MT-021 User Manual

In next steps you will see how to create basic configuration, which can be described by
following points:
Entering PIN code,
Adding telephone number to authorized phone list,
Defining event for binary input I1 when it is changing its state from 0 to 1 (rising
edge),
Defining SMS sending rule which will send SMS that reads “ALARM” to a predefined
phone number when previously configured event is triggered,
Setting RTC clock of the device.
4.1. Configuring MT-021 using MTManager
Install MTManager on your PC from CD provided with module.
When installed with default setting MTManager creates shortcuts on Desktop and in
Start menu.
Please proceed to next step.
Start MTManager by double-click on shortcut icon:
In newly created MTManager project add new module using main menu option
General->New->Module.
17