PPC Package

Option: Machine restoration
completion of the maintenance activity that requires to be done on the machine. The
different categories of maintenance may be viewed in an array for selection. They
may be Breakdown, Conditional, Preventive etc. The selection requires the use of the
escape key. The escape key is to be used to register the planned date of completion
into the computer. The nature of fault can be added or altered by the maintenance
personnel.
mm100placm
MM001AMARD
RESTORATION/LABOUR COST OF MAINTENANCE
Machine number [ ] [ ]
Machine Location [ ]
PDC [ ]
Handover date [ ]
Handover time [ ]
Maintenance type [ ] [ ]
Maintenance category [ ] [ ]
Labour code 1 Labour code 2 Labour code 3
[ ] [ ] [ ]
Repairs Carried out
[ ]
Restoration date [ ] Restoration time [ ]
Labour cost [ ] Idle shifts [ ]
Input:
Action:
Machine number, labour code 1, labour code 2, labour 3, repairs carried out,
restoration date, restoration time, labour class, number of persons, labour hour (to be
input in an array), labour cost,idle shifts
Once the maintenance activity is completed, the machine is restored back in the
section and the restoration details are registered in the computer. On entering the
machine number and pressing the return key, the machine handover details are
displayed. After entering the restoration time and pressing the return key, the labour
classes, the number of persons of each class and the number of hours put in by each
class of labour is to be entered in an array to calculate the labour cost. The labour
cost for each class and the total labour cost are displayed on screen. The user comes
back to the original screen by pressing the escape key. The escape key comes good
again to record the restoration details in the computer.
Ordnance Factories Institute of Learning, Dehradun 81