FLASHit 9-STM32 Manual - hse-electronics GmbH
FLASHit 9-STM32 Manual - hse-electronics GmbH
FLASHit 9-STM32 Manual - hse-electronics GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>FLASHit</strong> 9-<strong>STM32</strong> <strong>Manual</strong><br />
1 <strong>FLASHit</strong><br />
1.1 <strong>FLASHit</strong><br />
<strong>FLASHit</strong> allows you to quickly and easily program application software in a <strong>STM32</strong> ARM Cortex-M3<br />
1.1 How does <strong>FLASHit</strong> work?<br />
<strong>FLASHit</strong> was designed for easy use. Once a connection to the hardware has been established via the RS232 interface<br />
and the interface parameters have been set, you only have to select an application for the upload / programming<br />
process (burning) to the target system to begin.<br />
This process occurs as follows (without enabled options):<br />
- Automatical detection of the MCU-type<br />
- The bootstrap loaders of the target system are activated<br />
- The configuration of the target system is determined<br />
- The type of FLASH being used is detected automatically<br />
- The FLASH data are displayed<br />
- Hex file analysis: The sectors to be deleted are identified and selected and hex data are arranged in a binary<br />
array<br />
- The FLASH memory is deleted (either individual sectors or the entire chip)<br />
- FLASH in the target system is reprogrammed in blocks (programmed sectors are selected).<br />
2 System Requirements<br />
Target System<br />
MCU: <strong>STM32</strong> ARM Cortex M3<br />
PC<br />
Operating system:<br />
Hardware:<br />
All current versions of Windows<br />
Pentium or higher<br />
10-06 Seite 4 e-flashit-manual-cortex18.docx
Change language