FLASHit 9-STM32 Manual - hse-electronics GmbH
FLASHit 9-STM32 Manual - hse-electronics GmbH
FLASHit 9-STM32 Manual - hse-electronics GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>FLASHit</strong> 9-<strong>STM32</strong> <strong>Manual</strong><br />
6.4 Command Line Generator (CmdLine)<br />
To facilitate the use of command line functions in <strong>FLASHit</strong>, the CmdLine program is included on the CD and can be<br />
used to automatically generate<br />
- a command line and an ICON<br />
- a C source code (for access from a separate application)<br />
Note: The CmdLine can only be launched externally.<br />
This window makes it extremely easy to adjust the various settings. In the example here, the upload hex file (HEX-<br />
FILE=J:\Hexfiles\canopen.hex) has been selected which<br />
initiates the automatic start of the upload (AUTOSTART)<br />
sets the FLASH memory erase mode to "Sector Erase" (ERASE MODE=SECTOR)<br />
specifies that <strong>FLASHit</strong> will exit automatically (EXIT)<br />
uses the COM port (COM=1)<br />
sets the baud rate (Baud=57600)<br />
The menus highlighted in bold contain settings that have been changed.<br />
The sequence of the individual commands has no effect!<br />
This button lets you launch <strong>FLASHit</strong> directly from the specified command line.<br />
This button lets you create shortcuts with <strong>FLASHit</strong> and the specified command line.<br />
This button lets you access <strong>FLASHit</strong> from a Visual C++ code.<br />
This button lets you access <strong>FLASHit</strong> from a Borland C code.<br />
10-06 Seite 23 e-flashit-manual-cortex18.docx
Change language