FLASHit 9-STM32 Manual - hse-electronics GmbH
FLASHit 9-STM32 Manual - hse-electronics GmbH
FLASHit 9-STM32 Manual - hse-electronics GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>FLASHit</strong> 9-<strong>STM32</strong> <strong>Manual</strong><br />
<strong>Manual</strong> check of port lines<br />
- signals (input)<br />
The colors of the symbol indicate the logical level. This means<br />
the logical level of "1" can range from approx. +5 V to approx.<br />
+12 V depending on the computer model. The corresponding<br />
negative level: approx. –5 V to approx. –12 V.<br />
- outputs<br />
By clicking the symbol, you can set a signal to the<br />
appropriate port.<br />
The logical level is shown in place of the exact voltage.<br />
WARNING: Any modification to the outputs may result in the destruction of hardware (PC and/or externally<br />
connected devices)!<br />
Control Lines of the Printer Connection<br />
The control lines of the first default printer (address 0x378) can be modified and monitored manually.<br />
WARNING: Any modification to the outputs may result in the destruction of hardware (PC and/or externally<br />
connected devices)!<br />
10-06 Seite 22 e-flashit-manual-cortex18.docx
Change language