Vuototecnica Vacuum Catalog 2008

For our complete vacuum range please visit www.vuototecnica.us
USA
STANDARD FLAT CUPS
• Designed for handling flat work pieces especially in fast pick and place applications.
• Can be used in light-weight shear plane applications or where the work piece
has to be turned through 90 o .
• The models listed below can be used with the fittings shown on the right.
[Cups]
Part No. A B C D E G Fitting Number
01 10 10 11.0 7 4.0 10 8.5 7.0 00 08 03
01 12 10 11.0 8 4.0 12 8.0 9.0 00 08 03
01 15 10 12.0 8 4.0 15 8.0 9.5 00 08 03
01 18 10 12.0 8 4.0 18 8.0 9.5 00 08 03
01 20 10 12.0 8 4.0 20 8.0 9.5 00 08 03
Traditional cups, designed in the typical cup shape
and with diameters ranging from 4 to 85 mm;
they are normally made with natural para rubber
with 45 Shore hardness, oil-resistant rubber with
60 Shore hardness, stabilized silicone with 45
Shore hardness and, upon request, with special
compounds which are able to withstand extremely
high temperatures or corrosive fluids.
01 22 10 13.0 8 4.0 22 8.0 10.0 00 08 03
01 25 15 16.0 12 6.0 25 10.0 11.5 00 08 05
01 30 15 17.0 12 6.0 30 10.0 12.5 00 08 05
01 35 15 16.0 15 10.0 35 10.0 11.5 00 08 20
01 40 15 18 15 10.0 40 10.0 12.5 00 08 20
01 45 15 23.0 15 10.0 45 10.0 14.5 00 08 20
00 08 03 - G18 (BSPP)
00 08 03 - N18 (NPT)
00 08 05 - G18 (BSPP)
00 08 05 - N18 (NPT)
00 08 20 - G14 (BSPP)
00 08 20 - N14 (NPT)
Art.
Force A B C D E F G H I
Kg. Ø Ø Ø Ø
01 04 10 0.03 7.5 3 1.5 4 6.0 -- 7.0 -- --
GENERIC BELLOWS CUPS
01 05 10 0.05 8.0 3 1.5 5 6.0 -- 7.0 -- --
01 06 10 0.07 8.0 3 1.5 6 6.0 -- 7.0 -- --
01 08 10 0.12 8.0 5 2.5 8 6.0 -- 7.0 -- --
01 09 07 0.15 7.0 5 2.0 9 5.5 -- 6.0 -- --
01 10 10 0.19 11.0 7 4.0 10 8.5 -- 7.0 -- --
01 12 10 0.28 11.0 8 4.0 12 8.0 -- 9.0 -- --
01 15 10 0.44 12.0 8 4.0 15 8.0 -- 9.5 -- --
01 18 10 0.63 12.0 8 4.0 18 8.0 -- 9.5 -- --
01 20 10 0.78 12.0 8 4.0 20 8.0 -- 9.5 -- --
01 22 10 0.95 13.0 8 4.0 22 8.0 -- 10.0 -- --
01 25 10 1.23 8.0 12 6.0 25 2.0 -- 3.5 -- --
01 25 15 1.23 16.0 12 6.0 25 10.0 -- 11.5 -- --
01 30 10 1.76 8.0 12 6.0 30 1.0 -- 3.5 -- --
01 30 15 1.76 17.0 12 6.0 30 10.0 -- 12.5 -- --
01 35 10 2.40 8.0 12 6.0 35 1.0 -- 3.5 -- --
01 35 15 2.40 16.0 15 10.0 35 10.0 -- 11.5 -- --
01 40 15 3.14 18.0 15 10.0 40 10.0 -- 12.5 -- --
01 45 10 3.98 18.0 15 10.0 45 5.0 -- 9.5 -- --
01 45 15 3.98 23.0 15 10.0 45 10.0 -- 14.5 -- --
01 60 10 7.06 22.0 15 10.0 60 4.0 25 -- 10 2.5
01 85 10 14.18 41.0 25 15.0 85 16.0 25 -- 23 4.0
• Very popular for handling food and food packaging and other non-flat
[Bellows
[Bellows
cups]
products. cups]
• The thin outside lip deforms to mate evenly with rough and unflat surfaces
such as plastic packaging, foodstuffs such as bread, cookies, candy and
other non uniform shapes.
• The models listed below can be used with the fittings shown on the right.
Part No. A B C D E F G Fitting Number
designed purposely to handle food products such
as biscuits, The bellows bread, cups pizza, shown brioches on this etc., page as well have as been
paper designed or plastic purposely bags to containing handle food chocolates, products such
sweetmeats, as biscuits, pasta, bread, meals, pizza, powders, brioches etc. etc., as well as
Being paper very or flexible, plastic they bags can containing also be used chocolates, to
01 20 23 23 14.5 5 20 5 14 4 00 08 133
01 30 32 32 20 6.5 30 7 21 5 00 08 135
compensate sweetmeats, flatness pasta, errors meals, or powders, for gripping etc. on
inclined Being surfaces. very 01 flexible, 40 42they can also 42 be used to 1.01 20 6.5 40 7 28 5 00 08 135
They compensate are normally flatness available errors in the three or for series gripping of on
compounds. inclined surfaces.
01 50 53 35 27 10.5 50 10 35 6 00 08 142
They are normally available in the three series of
compounds.
Multiple Bellows
The bellows cups shown on this page have been
00 08 133 - G18 (BSPP)
00 08 133 - N18 (NPT)
00 08 135 - G18 (BSPP)
00 08 135 - N18 (NPT)
00 08 135 - G14 (BSPP)
00 08 135 - N14 (NPT)
1/4” / 1/8”
AF 13mm
Art.
Force A B C D E F G
Kg. Ø Ø Ø Ø
01 20 23 0.78 23 14.5 5 20 5 14 4
Force 1.76 A32 20 B 6.5 C 30 D E F G
01 30
Art.
01 40 Kg. 3.14 20 Ø 6.5 Ø 40 Ø Ø
32 7 21 5
42 42 7 28 5
20 01 23 50 53 0.78 4.90 2353 14.5 27 10.5 5 50 20 105 35 6
01 14 4
01 30 32 1.76 32 20 6.5 30 7 21 5
01 40 42 3.14 42 20 6.5 40 7 28 5
01 50 53 4.90 53 27 10.5 50 10 35 6
For level compensators and other accessories, refer to
www.vuototecnica.us
Art.
Force A B C D E F G
Kg. Ø Ø Ø Ø
01
Art. 01
Force 0.95 A 14.5 B 5C 22D E F G
19 5.5 11 4
2.26
Kg.
14.5
Ø
5
Ø
34
Ø Ø
26 5.5 17 4
22 19
34 26
01 43 28 3.62 28 20 6.5 43 7 21.5 4
22 19 0.95 19 14.5 5 22 5.5 01 11 4
01 53 5.51 35 27 10.5 53 9.5 35 30.5 6
34 26 2.26 26 14.5 5 34 5.5 01 17 4
01 43 28 3.62 28 20 6.5 43 7 21.5 4
01 53 35 5.51 35 27 10.5 53 9.5 30.5 6
• Single bellows cups are very popular in standard handling applications.
[Bellows cups]
[Bellows • The bellows cups] design aids the lifting of thin sheets of paper, steel, plastic and
other work pieces where the pick up point varies in position.
• When sealed against the pick up surface the bellows concept offers a vertical
movement independent of the machine which aids separation of thin sheets
and other products as described previously.
• Able to handle concave and convex products.
• The models listed above can be used with the fittings shown on the right.
Single Bellows
The particular shape of the bellows cup makes
The particular shape of the bellows cup makes
them collapse rapidly when they are in contact
them collapse rapidly when they are in contact
with the surface of the load to be handled, lifting
the load
with
some
the
centimetres,
surface of the
independently
load to be
of
handled,
the
lifting
machine the load movement; some centimetres, this quick independently movement
1.11 of the
prevents machine the load movement; below from remaining this quick stuck movement
to
the surfaces prevents or the load load underneath. below from remaining stuck to
Due the to surfaces this feature, or load bellows underneath. cups are
recommended 1.11
Due to this in all feature, the cases bellows where it is cups are
necessary
recommended
to lift and
in
handle
all the
paper
cases
sheets,
where it is
cardboard sheets, thin plates, wooden panels,
necessary to lift and handle paper sheets,
glass slabs, etc.
cardboard sheets, thin plates, wooden panels,
Due to their high flexibility, they can also be used
glass slabs, etc.
to compensate flatness errors or for the grip on
inclined Due surfaces. to their high flexibility, they can also be used
These to cups compensate are available flatness in all errors the series or for of the grip on
compounds. inclined surfaces.
These cups are available in all the series of
compounds.
Part No. A B C D E F G Fitting Number
01 22 19 19 14.5 5 22 5.5 11 4 00 08 133
01 34 26 26 14.5 5 34 5.5 17 4 00 08 133
01 43 28 28 20 6.5 43 7 21.5 4 00 08 135
01 53 35 35 27 10.5 53 9.5 30.5 6 00 08 142
Vacuum Cup Materials
The part numbers shown in this catalogue indicate the cup only.
To specify the material of the cup the following suffixes should be used.
A - Nitrile Rubber N - Natural Rubber S - Silicone Rubber V - Viton Rubber B – Benz
(please refer to material data table on page 1)
Example: 01 18 10A (Nitrile rubber compound)
2
00 08 142 - G18 (BSPP)
00 08 142 - N18 (NPT)
00 08 142 - G14 (BSPP)
00 08 142 - N14(NPT)
1/4” / 1/8”
AF 17mm
AF 22mm