Fibre C - Ravago
Fibre C - Ravago
Fibre C - Ravago
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Formed Elements<br />
Material<br />
L-moulded element<br />
Angular moulded element with 1 angle<br />
··<br />
Panel size: max. 3600/1200 mm<br />
··<br />
100 mm < S1 < 1100 mm<br />
··<br />
100 mm < S2 < 1100 mm<br />
··<br />
S1 + S2 = max. 1200 mm<br />
··<br />
100 mm < L < 3600 mm<br />
··<br />
70° < angle a < 180°<br />
··<br />
Edge radius at 90°: 5 mm +/- 3 mm<br />
S 1<br />
C-moulded element<br />
Round moulded part / 1 axial curved - 2D element<br />
··<br />
Panel size: max. 3600/1200 mm<br />
··<br />
R > 400 mm<br />
··<br />
100 mm < L < 3600 mm<br />
··<br />
100 mm < arch length < 1200 mm<br />
··<br />
Angle a: max. 180°<br />
Bending direction: lengthwise or crosswise, geometry: max.<br />
semi-circle<br />
L<br />
a<br />
S 2<br />
R<br />
U-moulded element<br />
Angular moulded element with 2 angles<br />
··<br />
Panel size: max. 3600/1200 mm<br />
··<br />
100 mm < S1 < 800 mm<br />
··<br />
100 mm < S2 < 800 mm<br />
··<br />
300 mm < B < 1000 mm<br />
··<br />
100 mm < L < 3600 mm<br />
··<br />
S1 + S2 + B < 1200 mm<br />
··<br />
100 mm < L < 3600 mm<br />
··<br />
70° < angle a or b < 180°<br />
··<br />
Edge radius at 90°: 5 mm +/- 3 mm<br />
Round moulded element<br />
2 axial curved / 3D elements - on request<br />
Hydrophobising & Sandblasting<br />
In machined elements, hydrophobising is applied manually.<br />
The appearance of the manually applied coating may vary from<br />
standard panels. Sandblasted surfaces (only FE possible) may in<br />
formed elements likewise vary from the straight standard panel,<br />
as all parts are blasted by hand.<br />
Fastening options<br />
··<br />
Visible: rivet<br />
··<br />
Invisible: undercut anchor and fastening (in L- and U-moulded<br />
elements)<br />
S 1<br />
a<br />
b<br />
S 2<br />
Tolerances in moulded elements<br />
Each moulded element is subjected to a dimensional inspection<br />
and checked for length, width, angle and thickness.<br />
All results are recorded in internal reports. The values are<br />
measured with residual moisture of 6 - 10 %.<br />
B<br />
Length<br />
Tolerances<br />
Radius at round elements<br />
Tolerances<br />
length up to 1000 mm<br />
± 2,0 mm<br />
radius up to 500 mm<br />
± 1,5 mm<br />
length above 1000 mm<br />
± 2,5 mm<br />
radius 500 - 1500 mm<br />
± 2,0 mm<br />
length above 2000 mm<br />
± 3,0 mm<br />
radius above 1500 mm<br />
on request<br />
length above 3000 mm<br />
± 3,5 mm<br />
Diagonal<br />
Tolerances<br />
Width<br />
Tolerances<br />
diagonal difference up to 1500 mm<br />
± 4,0 mm<br />
width up to 1000 mm<br />
± 2,0 mm<br />
diagonal difference above 1500 mm<br />
± 4,5 mm<br />
width above 1000 mm<br />
± 2,5 mm<br />
diagonal difference above 2500 mm<br />
± 5,5 mm<br />
Thickness<br />
Tolerances<br />
diagonal difference above 3500 mm<br />
± 6,5 mm<br />
moulded element 13 mm<br />
± 1,5 mm<br />
Edge radius<br />
Tolerances<br />
edge radius 5 mm<br />
± 3,0 mm<br />
29
Change language