EM3800SXâ¢EM5000SXâ¢EM6500SX - Geotech Environmental ...

More documents

Recommendations

Info

Remote Control Kit (optional) 1. Remove the blind 6-P connector from the back of the control panel. 2. Connect the remote control cable to the back of the control panel and remote control box. 3. Install the two cable ties as shown. REMOTE CONTROL CABLE CABLE TIES REMOTE CONTROL CABLE REMOTE CONTROL BOX Connect the blind connector when not using the remote control. Engine will not start unless the blind connector is connected. 66
Remote Control Box PILOT LAMP START BUTTON STOP BUTTON Starting the engine with remote control 1. Turn the fuel valve on the generator to the ON position. 2. Turn the Auto Throttle switch on the generator to the OFF position. 3. Turn the engine switch on the generator to the ON position. 4. Press the start button until engine starts and the pilot lamp comes on. Stopping the engine with remote control 1. Press the stop button. 2. Turn the engine switch on the generator to the OFF position. 3. Turn the fuel valve lever on the generator to the OFF position. 67
Page 1 and 2:
EM3800SX•EM5000SX•EM6500SX See
Page 3 and 4:
Congratulations on your selection o
Page 5 and 6:
CONTENTS GENERATOR SAFETY .........
Page 7 and 8:
GENERATOR SAFETY SAFETY LABEL LOCAT
Page 9 and 10:
Electric Shock Hazards The generato
Page 11 and 12:
TRANSPORT HANDLE FUEL TANK CAP FUEL
Page 13 and 14:
Fuel Valve Lever The fuel valve is
Page 15 and 16:
DC Terminals The DC terminals may O
Page 17 and 18: AC Circuit Breaker The AC circuit b
Page 19 and 20: GENERATOR USE Connections to a Buil
Page 21 and 22: AC Operation 1. Start the engine (s
Page 23 and 24: Voltage Selector Switch The power a
Page 29 and 30: An overloaded DC circuit, excessive
Page 31 and 32: High Altitude Operation At high alt
Page 33 and 34: Refueling With the engine stopped,
Page 35 and 36: STARTING THE ENGINE/STOPPING THE EN
Page 37 and 38: MAINTENANCE The Importance of Maint
Page 39 and 40: Maintenance Schedule REGULAR SERVIC
Page 41 and 42: Air Cleaner Service A dirty air cle
Page 43 and 44: Spark Plug Service In order to serv
Page 45 and 46: Fuse Replacement If the fuse is blo
Page 47 and 48: Service according to the table belo
Page 49 and 50: Engine Oil 1. Change the engine oil
Page 51 and 52: TRANSPORTING When transporting the
Page 53 and 54: No electricity at the AC receptacle
Page 55 and 56: Problems That May Affect Emissions
Page 57 and 58: WIRING DIAGRAM EM3800SX 55
Page 59 and 60: SPECIFICATIONS Dimensions Model Typ
Page 61 and 62: Dimensions Model Type Description c
Page 63 and 64: Important Safety Precautions Make s
Page 65 and 66: Handle Installation Install the rig
Page 67: Hanger Kit Installation (optional)
Page 71 and 72: CABLE TIE STARTER SOLENOID STARTER
Page 73 and 74: BEFORE OPERATION Before using your
Page 75 and 76: Honda PUBLICATIONS Shop Manual This
Page 77 and 78: PRE-OPERATION CHECK ...............
Page 79: 00X31-Z21-6050 K2:EM5000SX
show all

EM3800SXâ¢EM5000SXâ¢EM6500SX - Geotech Environmental ...

Create successful ePaper yourself

Delete template?

Save as template?

EM3800SXâ¢EM5000SXâ¢EM6500SX - Geotech Environmental ...