EM3800SX•EM5000SX•EM6500SX - Geotech Environmental ...

AC Operation
1. Start the engine (see page 33 ).
2. Turn the voltage selector switch to either position.
With the voltage selector switch in the ‘‘120/240V’’ position, you can
use the 120V and 120/240V receptacles simultaneously. If you are
NOT using the 120/240V receptacle, then select the ‘‘120V ONLY’’
position.
3. Switch the AC circuit breaker ON.
4. Plug in the appliance.
Be sure that all appliances are in good working order before
connecting them to the generator. If an appliance begins to operate
abnormally, becomes sluggish, or stops suddenly, turn off the ignition
switch lever immediately. Then disconnect the appliance and examine
it for signs of malfunction.
Most motorized appliances require more than their rated power for
startup.
Do not exceed the current limit specified for any one receptacle. If an
overloaded circuit causes the AC circuit breaker or AC circuit protector
to switch OFF, reduce the electrical load on the circuit, wait a few
minutes and then reset the AC circuit breaker or AC circuit protector.
VOLTAGE SELECTOR SWITCH
AC CIRCUIT PROTECTORS
1
AC CIRCUIT BREAKER
1:Except EM3800SX
19