EM3800SXâ¢EM5000SXâ¢EM6500SX - Geotech Environmental ...

More documents

Recommendations

Info

Voltage Selector Switch (Dual Voltage System) The voltage selector switch switches the main power carrying windings of the generator to produce ‘‘120V ONLY’’ or ‘‘120/240V’’. If a 240V appliance is connected to the 4-prong receptacle, the switch must be in the ‘‘120/240V’’ position. If only a 120V appliance is being connected to any of the 120V 3-prong receptacles, select the ‘‘120V ONLY’’ position. Switch Position 120/240V: The 120V and 120/240V receptacles can be used simultaneously. 120V ONLY: ONLY the 120V receptacles can be used. Do not use the 120/240V receptacle in this position. The most power will be available at the 30A 120V locking plug receptacle. VOLTAGE SELECTOR SWITCH 120/240V 120V ONLY 120/240V 120V ONLY GROUND TERMINAL Ground Terminal The generator ground terminal is connected to the frame of the generator, the metal non-current-carrying parts of the generator, and the ground terminals of each receptacle. Before using the ground terminal, consult a qualified electrician, electrical inspector, or local agency having jurisdiction for local codes or ordinances that apply to the intended use of the generator. 12
DC Terminals The DC terminals may ONLY be used for charging 12-volt automotive type batteries. The terminals are colored red to identify the positive ( ) terminal and black to identify the negative ( ) terminal. The battery must be connected to the generator DC terminals with the proper polarity (battery positive to generator red terminal and battery negative to the generator black terminal). DC Circuit Protector The DC circuit protector automatically shuts off the DC battery charging circuit when the DC charging circuit is overloaded, when there is a problem with the battery, or when the connections between the battery and the generator are improper. DC CIRCUIT PROTECTOR NEGATIVE TERMINAL (BLACK) POSITIVE TERMINAL (RED) 13
Page 1 and 2: EM3800SX•EM5000SX•EM6500SX See
Page 3 and 4: Congratulations on your selection o
Page 5 and 6: CONTENTS GENERATOR SAFETY .........
Page 7 and 8: GENERATOR SAFETY SAFETY LABEL LOCAT
Page 9 and 10: Electric Shock Hazards The generato
Page 11 and 12: TRANSPORT HANDLE FUEL TANK CAP FUEL
Page 13: Fuel Valve Lever The fuel valve is
Page 17 and 18: AC Circuit Breaker The AC circuit b
Page 19 and 20: GENERATOR USE Connections to a Buil
Page 21 and 22: AC Operation 1. Start the engine (s
Page 23 and 24: Voltage Selector Switch The power a
Page 29 and 30: An overloaded DC circuit, excessive
Page 31 and 32: High Altitude Operation At high alt
Page 33 and 34: Refueling With the engine stopped,
Page 35 and 36: STARTING THE ENGINE/STOPPING THE EN
Page 37 and 38: MAINTENANCE The Importance of Maint
Page 39 and 40: Maintenance Schedule REGULAR SERVIC
Page 41 and 42: Air Cleaner Service A dirty air cle
Page 43 and 44: Spark Plug Service In order to serv
Page 45 and 46: Fuse Replacement If the fuse is blo
Page 47 and 48: Service according to the table belo
Page 49 and 50: Engine Oil 1. Change the engine oil
Page 51 and 52: TRANSPORTING When transporting the
Page 53 and 54: No electricity at the AC receptacle
Page 55 and 56: Problems That May Affect Emissions
Page 57 and 58: WIRING DIAGRAM EM3800SX 55
Page 59 and 60: SPECIFICATIONS Dimensions Model Typ
Page 61 and 62: Dimensions Model Type Description c
Page 63 and 64: Important Safety Precautions Make s
Page 65 and 66:
Handle Installation Install the rig
Page 67 and 68:
Hanger Kit Installation (optional)
Page 69 and 70:
Remote Control Box PILOT LAMP START
Page 71 and 72:
CABLE TIE STARTER SOLENOID STARTER
Page 73 and 74:
BEFORE OPERATION Before using your
Page 75 and 76:
Honda PUBLICATIONS Shop Manual This
Page 77 and 78:
PRE-OPERATION CHECK ...............
Page 79:
00X31-Z21-6050 K2:EM5000SX
show all

EM3800SXâ¢EM5000SXâ¢EM6500SX - Geotech Environmental ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

EM3800SXâ¢EM5000SXâ¢EM6500SX - Geotech Environmental ...