EM3800SXâ¢EM5000SXâ¢EM6500SX - Geotech Environmental ...

More documents

Recommendations

Info

CONTROLS Engine Switch To start and stop the engine. Key position: OFF: To stop the engine. Key can be removed/inserted. ON: To run the engine after starting. START: To start the engine by operating the starter motor. OFF ON START ENGINE SWITCH Starter Grip To start the engine, pull the starter grip lightly until resistance is felt, and then pull briskly. Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage to the starter. The recoil starter is used to start the engine if the generator is not equipped with a 12-volt battery to operate the starter motor, or if the battery does not contain adequate charge to operate the starter motor. RECOIL STARTER STARTER GRIP 10
Fuel Valve Lever The fuel valve is located between the fuel tank and carburetor. When the valve lever is in the ON position, fuel is allowed to flow from the fuel tank to the carburetor. Be sure to return the fuel valve lever to the OFF position after stopping the engine. FUEL VALVE LEVER OFF ON Choke Rod The choke is used to provide an enriched fuel mixture when starting a cold engine. It can be opened and closed by operating the choke rod manually. Pull the rod out toward CLOSED to enrich the mixture for cold starting. OPEN CLOSED CHOKE ROD 11
Page 1 and 2: EM3800SX•EM5000SX•EM6500SX See
Page 3 and 4: Congratulations on your selection o
Page 5 and 6: CONTENTS GENERATOR SAFETY .........
Page 7 and 8: GENERATOR SAFETY SAFETY LABEL LOCAT
Page 9 and 10: Electric Shock Hazards The generato
Page 11: TRANSPORT HANDLE FUEL TANK CAP FUEL
Page 15 and 16: DC Terminals The DC terminals may O
Page 17 and 18: AC Circuit Breaker The AC circuit b
Page 19 and 20: GENERATOR USE Connections to a Buil
Page 21 and 22: AC Operation 1. Start the engine (s
Page 23 and 24: Voltage Selector Switch The power a
Page 29 and 30: An overloaded DC circuit, excessive
Page 31 and 32: High Altitude Operation At high alt
Page 33 and 34: Refueling With the engine stopped,
Page 35 and 36: STARTING THE ENGINE/STOPPING THE EN
Page 37 and 38: MAINTENANCE The Importance of Maint
Page 39 and 40: Maintenance Schedule REGULAR SERVIC
Page 41 and 42: Air Cleaner Service A dirty air cle
Page 43 and 44: Spark Plug Service In order to serv
Page 45 and 46: Fuse Replacement If the fuse is blo
Page 47 and 48: Service according to the table belo
Page 49 and 50: Engine Oil 1. Change the engine oil
Page 51 and 52: TRANSPORTING When transporting the
Page 53 and 54: No electricity at the AC receptacle
Page 55 and 56: Problems That May Affect Emissions
Page 57 and 58: WIRING DIAGRAM EM3800SX 55
Page 59 and 60: SPECIFICATIONS Dimensions Model Typ
Page 61 and 62: Dimensions Model Type Description c
Page 63 and 64:
Important Safety Precautions Make s
Page 65 and 66:
Handle Installation Install the rig
Page 67 and 68:
Hanger Kit Installation (optional)
Page 69 and 70:
Remote Control Box PILOT LAMP START
Page 71 and 72:
CABLE TIE STARTER SOLENOID STARTER
Page 73 and 74:
BEFORE OPERATION Before using your
Page 75 and 76:
Honda PUBLICATIONS Shop Manual This
Page 77 and 78:
PRE-OPERATION CHECK ...............
Page 79:
00X31-Z21-6050 K2:EM5000SX
show all

EM3800SXâ¢EM5000SXâ¢EM6500SX - Geotech Environmental ...

Create successful ePaper yourself

Delete template?

Save as template?

EM3800SXâ¢EM5000SXâ¢EM6500SX - Geotech Environmental ...