CADRE 10/11 - Holtkamp

CADRE
Upright Shelf Units (combination of uprights and upright shelves)
Height Raster
Assembled height includes plinth in cm
without top cladding panel (for cladding panel add 4.6 cm to final height)
Type No.:
8
Upright Depth 36,0 cm
Plinth Base Depth 39,7 cm
Range Layout and Width Calculation Depth Raster
Upright shelf units are open shelf elements of differing grid heights. A left-side upright is included and the right-side
must be supplemented with further upright shelf units or a right-side upright (2.) of the same height. When ordering,
please include the sequence in which the upright elements are to be positioned (a sketch) in order to determine the
length of the plinth base and any possible divisions (upwards of 240 cm length).
A left-side upright is included in the upright shelf unit. The right-side upright
must be ordered for every upright combination.
Drawers for insertion in upright compartments, with inset fronts and TIP-ON fittings, can
be installed behind sliding doors (compare to 6. with overlay fronts).
Doors hinged on uprights include slide-in rear panels. Note whether the doors hinge on the left (L) or right (R) and
whether the handle position is at the top or bottom. Mirrored rear panels are always included behind display cabinet glass.
Flap doors hinged on uprights include slide-in rear panels. Note whether the handle position is at the top
or bottom. The depth of existing slide-in dividers will automatically be adjusted (please include sketch).
Drawer inserts for upright shelf units that have overlay fronts cannot be combined with
sliding doors. You may choose between a TIP-ON fitting and a handle.
Sliding doors hinged on uprights. Door tracks must be ordered separately. The width of the track must be at least a
front grid width wider than the sliding doors. Note whether the handle position is at the top or bottom.
Slide-in rear panels for open shelves in your choice of Cream white or as mirrored or lighted glass rear panel.
Slide-in dividers are required for an upright shelf width upwards of 112.5 cm. The depth of the dividers
must be adapted to the rear panel situation (wood, glass 9a., no slide-in rear panels 9b.).
As with the plinth base, the overall width of the cladding panels will be calculated and any necessary
divisions will be determined (upwards of 240 cm length) in accordance with the sketch.
For side cladding panels, the cladding panels and plinth base will be adjusted to fit (acc. to sketch).
RETAIL PRICES in £ Sterling
including a Direct Home Delivery and Fit Service subject to terms and conditions
Dimensions in cm
* side cladding increases the group width by 2 x 4.6 cm.
Respective
types on page
29-41
42
48
46-48
45-46
45
49
44-45
44
42
42
I
N
F
O
G
R
O
U
P
S
I
N
D
I
V
I
D
U
A
L
T
Y
P
E
S
U
P
R
I
G
H
T
S
H
E
L
F
U
N
I
T
S
U
P
R
I
G
H
T
T
Y
P
E
S
F
R
O
N
T
S
A
C
C
E
S
S
O
R
I
E
S
L
I
G
H
T
I
N
G