Specification sheet (English) - Trend

More documents

Recommendations

Info

A B C D ADDRESS BAUD 1 2 4 8 16 32 64 19K2 9K6 1K2 DP RX OK TX A B C D ADDRESS BAUD 1 2 4 8 16 32 64 19K2 9K6 1K2 DP RX OK TX IQ23x Data Sheet HARDWARE (continued) LKE/10mA: Provides 10 mA supply (e.g. for potentiometers) 13 ! N & If the input device is 100 Ω to 1000 Ω, the analogue input will be 1 V to 10 V. To install a link header on a channel, the input links are removed and the link header is plugged onto 8 of the 10 input linking pins as shown below, the two upper pins being left free; care must be taken to correctly orientate the link header. "8 4 #8 4 -/ # 4 8 link header in position ) 1" ) 1" + view on top of board ) ) + - ) board on left hand side + ) + + + + ) ) ) view on front edge of board Displays: The IQ23x can have two different types of local display; 2-line Display Panel or PC. 2-line Display Panel: The controller may be purchased with a 2DP option fitted in the cover. Alternatively an external 2DP (i.e. HDP, FPK, ENCLS/FP) may be connected by fitting the KIT/2xx/RDS option which provides a 25 way D type female connector on the upper face of the unit. If a display panel is mounted in the front cover, it will not be possible to connect an external 2-line display. The 2DP provides access to parameters within the controller. PC : A computer running a Trend Supervisor or Engineering Tool can be connected to the Trend network by way of the controller’s supervisor port without the need for an additional node controller although it does take a separate network address. When connected in this way the supervisor will have access to all devices on the network, and will function as if it were connected by way of its own node controller. The diagrams below illustrate the various combinations in which the display panels and supervisor/engineering tools can be connected. DP PC (connected via supervisor port) A B C D integral 2-line display panel option FPK or HDP 2‐line displays (connected via DP port if KIT/2xx/RDS option fitted) PC (connected via supervisor port) 4 IQ23x Series Controllers Data Sheet TA200538 Issue 2, 18-Jan-2012
Data Sheet IQ23x Compatibility Supervisors: 94x series, 921, 962, Viewpoint+. Utility software: PowerTool, 822+/Toolbox version 6, SET, WupDn. Controllers: It can communicate to other Trend IQ controllers using inter-controller communications. Interface: It can be connected to Trend interface modules. Check interface module specification to ensure compatibility. Local Display: 2-line Display Panel (external or internal). The IQ Configuration Reference Manual Addendum covers the compatibility between different types of strategy files, and between the IQ23x sensor logs, and supervisors and software tools. Compatibility with IQ111 (+), IQ131 (+) Fixing The IQ23x will fix to the same centres as the IQ111+ or IQ131+, and as the IQ111 or IQ131 with mounting bars. If the IQ111 or IQ131 weren’t originally mounted using the bars, then new fixing holes will need to be drilled. The IQ111+ and IQ131+ also had semicircular cutouts for mounting in the old small box (380 x 380 x 210 mm - no longer supplied); new holes would have to be drilled to fix the IQ23x. 308 mm (12.13”) 263 mm (10.35”) Size The footprint of the IQ23x is smaller than the IQ111+, IQ131+, and the IQ111, IQ131 with mounting bars. It is deeper than any of them. IQ Controller Height Width Depth IQ111/IQ131 with mounting bars 287 mm (11.3”) IQ111+/IQ131+ 340 mm (13.39”) IQ111/IQ131 240 mm (9.45”) IQ23x 288 mm (11.35”) 335 mm (13.19”) 358 mm (14.09”) 335 mm (13.19”) 339 mm (13.35”) 80 mm (3.15”) 80 mm (3.15”) 80 mm (3.15”) 93 mm (3.66”) Power The power requirements are shown in the adjacent table. Note that the requirements of the IQ23x are greater than those of the IQ111+, IQ131+. IQ Controller IQ111/IQ131 IQ111+/IQ131+ IQ23x 60 VA 35 VA 60 VA Power IQ23x Series Controllers Data Sheet TA200538 Issue 2, 18-Jan-20125
Page 1 and 2: ) ,, 4- 5 5 * ) 7, " & $ ! $ " '
Page 3: Data Sheet IQ23x Hardware (continue
Page 7 and 8: Data Sheet IQ23x I/O Channels IQ Co
Page 9 and 10: Data Sheet IQ23x Integral nodes (co
Page 11 and 12: Data Sheet IQ23x Firmware (continue
Page 13 and 14: ) ,, 4- 5 5 * ) 7, " & $ ! $ " '
Page 15 and 16: Data Sheet IQ23x Specification Elec

Specification sheet (English) - Trend

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?