Specification sheet (English) - Trend
Specification sheet (English) - Trend
Specification sheet (English) - Trend
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
A<br />
B<br />
C<br />
D<br />
ADDRESS<br />
BAUD<br />
1<br />
2<br />
4<br />
8<br />
16<br />
32<br />
64<br />
19K2<br />
9K6<br />
1K2<br />
DP<br />
RX<br />
OK<br />
TX<br />
A<br />
B<br />
C<br />
D<br />
ADDRESS<br />
BAUD<br />
1<br />
2<br />
4<br />
8<br />
16<br />
32<br />
64<br />
19K2<br />
9K6<br />
1K2<br />
DP<br />
RX<br />
OK<br />
TX<br />
IQ23x<br />
Data Sheet<br />
HARDWARE (continued)<br />
LKE/10mA: Provides 10 mA supply (e.g. for potentiometers)<br />
13 ! N<br />
<br />
& <br />
If the input device is 100 Ω to 1000 Ω, the analogue input will<br />
be 1 V to 10 V.<br />
To install a link header on a channel, the input links are removed<br />
and the link header is plugged onto 8 of the 10 input linking pins<br />
as shown below, the two upper pins being left free; care must be<br />
taken to correctly orientate the link header.<br />
"8<br />
4<br />
#8<br />
4 -/<br />
# 4<br />
8<br />
link header in position<br />
) 1"<br />
) 1"<br />
+<br />
view on top of<br />
board<br />
)<br />
) <br />
+<br />
- )<br />
board on left hand side<br />
+<br />
) + + + +<br />
) ) ) <br />
view on front<br />
edge of board<br />
Displays: The IQ23x can have two different types of local display; 2-line Display Panel or PC.<br />
2-line Display Panel: The controller may be purchased with<br />
a 2DP option fitted in the cover. Alternatively an external 2DP<br />
(i.e. HDP, FPK, ENCLS/FP) may be connected by fitting the<br />
KIT/2xx/RDS option which provides a 25 way D type female<br />
connector on the upper face of the unit.<br />
If a display panel is mounted in the front cover, it will not be<br />
possible to connect an external 2-line display. The 2DP provides<br />
access to parameters within the controller.<br />
PC : A computer running a <strong>Trend</strong> Supervisor or Engineering<br />
Tool can be connected to the <strong>Trend</strong> network by way of the<br />
controller’s supervisor port without the need for an additional<br />
node controller although it does take a separate network<br />
address. When connected in this way the supervisor will have<br />
access to all devices on the network, and will function as if it<br />
were connected by way of its own node controller.<br />
The diagrams below illustrate the various combinations in which the display panels and supervisor/engineering tools can be<br />
connected.<br />
DP<br />
PC (connected via<br />
supervisor port)<br />
A<br />
B<br />
C<br />
D<br />
integral 2-line display<br />
panel option<br />
FPK or HDP<br />
2‐line displays<br />
(connected<br />
via DP port if<br />
KIT/2xx/RDS<br />
option fitted)<br />
PC (connected<br />
via supervisor<br />
port)<br />
4 IQ23x Series Controllers Data Sheet TA200538 Issue 2, 18-Jan-2012