datasheet - Dolomite Microfluidics

The Dolomite Centre Ltd
Part name
Part number
Linear Connector 7-way 3200148
Linear Connector 7-way Microchannel 3200290
Linear Connector 7-way Female 3200291
Linear Connector 7-way In-line 3200292
Linear Connector Funnel 3200362
Linear Connector Seal 7-way (FKM) 3200299
Funnel FFKM Seal (Pack of 10) 3200371
Description
Multiflux-2 Linear Connectors allow multiple tubing lines to be simultaneously connected
in a small space with precise alignment of flow paths. The Linear Connector 7-way is ideal
for microfluidics or general purpose lab-use and provides fast and reliable connection of
0.8 mm O.D. tubing. The in-built tube restraint mechanism holds tubes securely in place
for robust operation. Dolomite has a range of compatible Multiflux-2 Interfaces to enable
the connector to be used with microfluidic chips. Alternatively, compatible interfaces (see
design guide) can be designed to allow the connector to be used in any instrument or
system to simplify fluidic routing and reduce assembly time.
Left to Right: Linear Connector 7-way (Part No. 3200148), Linear Connector 7-way female (Part No. 3200291) and
Linear Connector 7-way microchannel (Part No. 3200290)
The Linear Connector 7-way Microchannel is designed for optimum alignment of tubing
bores to microfluidic channels. This high performance connection features micro-scale
pins, which locate directly into the microfluidic chip to provide the alignment.
The Linear Connector 7-way In-line consists of 7 individual tubing to tubing connections
using the Linear Connector 7-way and Linear Connector 7-way Female. This provides a
multi-way continuous flow path which is quick to connect and disconnect.
The Linear Connector Funnel enables a single 1.6mm O.D. tube to be connected to a
series of fluid ports on a microfluidic chip. It is typically used in conjunction with Telos 7-
channel chips where the single tube feeds seven input fluid holes or collects from seven
output channels. The Linear Connector Funnel is compatible with Multiflux-2 interfaces
and can be used in combination with the Linear Connector 7-way female allowing one
1.6mm O.D. tube to be connected directly to seven 0.8mm O.D. output tubes.
MAR-000065 V 1.3 Page 2 of 11