Cooper B-Line Seismic Restraints - Dixie Construction Products
Cooper B-Line Seismic Restraints - Dixie Construction Products Cooper B-Line Seismic Restraints - Dixie Construction Products
APPROVED COMPONENTS CONCRETE INSERT 2 9 /16" (65mm) 4" (101mm) 1 1 /2" (38mm) 1 5 /8" (41mm) B3332 End Cap Styrofoam Filler 1 3 /8" (35mm) B32I-8 1 5 /8" (41mm) 2 7 /8" (73mm) 1 3 /8" (35mm) 11 /16" (17mm) 3/4" (19mm) .188 (4.8mm) Knockouts for Nailing Inserts to Forms Styrofoam Filler Part No. Length Design Load* in. (mm) lbs. (kN) B32I-8 8" (203) 1200 (5.34) B32I-12 12" (305) 2000 (8.89) B32I-16 16" (406) 2000 (8.89) B32I-20 20" (508) 2000 (8.89) B32I-24 24" (609) 2000 (8.89) B32I-32 32" (813) 2000 (8.89) B206 End Caps B32I-12 thru B32I-240 Seismic Approval: Structure Attachment Material: 12 Ga. (2.6mm) B32I-40 40" (914) 2000 (8.89) B32I-48 48" (1219) 2000 (8.89) B32I-60 60" (1524) 2000 (8.89) B32I-72 72" (1829) 2000 (8.89) B32I-84 84" (2133) 2000 (8.89) B32I-96 96" (2438) 2000 (8.89) B32I-108 108" (2743) 2000 (8.89) B32I-120 120" (3048) 2000 (8.89) B32I-144 144" (3657) 2000 (8.89) B32I-168 168" (4267) 2000 (8.89) B32I-192 192" (4877) 2000 (8.89) B32I-216 216" (5486) 2000 (8.89) B32I-240 240" (6096) 2000 (8.89) Loads concentrated within the last 2" (51mm) of concrete inserts 8" (203mm) and longer should not exceed 1000 Lbs. (4.45kN). Concrete inserts should be secured to forms on 16" (406mm) to 24" (609mm) intervals. B32I continuous concrete inserts are made from B32 channel. Use channel nuts designed for use in B32 channel. Styrofoam fillers are supplied with all B32I concrete inserts. B3332 end caps are furnished with inserts through 16" (406mm) long, and B206 end caps are furnished with inserts over 16" (406mm) long. * Continuous insert allowable load per foot of insert - 2000 lbs. (8.89kN) in 3000 psi (20.7MPa) normal weight concrete. COOPER B-Line 509 West Monroe Street Highland, Illinois 62249 Phone: 800-851-7415 Fax: 618-654-1917 Date: Page No. Sheet Number: 6 - 2 - 06 77 of Raafat S. Aboulhosn Structural Engineer S 3913
APPROVED COMPONENTS 2 9 /16" (65mm) CONCRETE INSERT 4" (101mm) 1 1 /2" (38mm) 1 5 /8" (41mm) B3322 End Cap 1 5 /8" (41mm) Styrofoam Filler 1 5 /8" (41mm) 3 1 /8" (79mm) 11 /16" (17mm) 3/4" (19mm) .188 (4.8mm) Knockouts for Nailing Inserts to Forms Styrofoam Filler B22I-8 1 5 /8" (41mm) Part No. Length Design Load* in. (mm) lbs. (kN) B22I-8 8" (203) 1200 (5.34) B205 End Caps B22I-12 thru B22I-240 B22I-12 12" (305) 2000 (8.89) B22I-16 16" (406) 2000 (8.89) B22I-20 20" (508) 2000 (8.89) B22I-24 24" (609) 2000 (8.89) B22I-32 32" (813) 2000 (8.89) Seismic Approval: Structure Attachment Material: 12 Ga. (2.6mm) B22I-40 40" (914) 2000 (8.89) B22I-48 48" (1219) 2000 (8.89) B22I-60 60" (1524) 2000 (8.89) B22I-72 72" (1829) 2000 (8.89) B22I-84 84" (2133) 2000 (8.89) B22I-96 96" (2438) 2000 (8.89) B22I-108 108" (2743) 2000 (8.89) B22I-120 120" (3048) 2000 (8.89) B22I-144 144" (3657) 2000 (8.89) B22I-168 168" (4267) 2000 (8.89) B22I-192 192" (4877) 2000 (8.89) B22I-216 216" (5486) 2000 (8.89) B22I-240 240" (6096) 2000 (8.89) Loads concentrated within the last 2" (51mm) of concrete inserts 8" (203mm) and longer should not exceed 1000 Lbs. (4.45kN). Concrete inserts should be secured to forms on 16" (406mm) to 24" (609mm) intervals. B22I continuous concrete inserts are made from B22 channel. Use channel nuts designed for use in B22 channel. Styrofoam fillers are supplied with all B22I concrete inserts. B3322 end caps are furnished with inserts through 16" (406mm) long, and B205 end caps are furnished with inserts over 16" (406mm) long. * Continuous insert allowable load per foot of insert - 2000 lbs. (8.89kN) in 3000 psi (20.7MPa) normal weight concrete. COOPER B-Line 509 West Monroe Street Highland, Illinois 62249 Phone: 800-851-7415 Fax: 618-654-1917 Date: Page No. Sheet Number: Raafat S. Aboulhosn Structural Engineer S 3913 6 - 2 - 06 78 of
- Page 29 and 30: Concrete Attachments Detail 4 Metal
- Page 31 and 32: Concrete Attachments STRUCTURAL ATT
- Page 33 and 34: STRUCTURAL ATTACHMENTS Minimum dist
- Page 35 and 36: STRUCTURAL ATTACHMENTS Concrete Att
- Page 37 and 38: STRUCTURAL ATTACHMENTS Wood Beam At
- Page 39 and 40: STRUCTURAL ATTACHMENTS Wood Beam At
- Page 41 and 42: Structural Steel Detail 16 Case 1 C
- Page 43 and 44: Concrete Attachments To Slab HANGER
- Page 45 and 46: Concrete Attachments To Slab HANGER
- Page 47 and 48: Concrete Attachments To Slab HANGER
- Page 49 and 50: Concrete Attachments To Slab HANGER
- Page 51 and 52: Strut Attachments Typical All Threa
- Page 53 and 54: HANGER ROD ATTACHMENTS & APPROVED C
- Page 55 and 56: HANGER ROD ATTACHMENTS & APPROVED C
- Page 57 and 58: HANGER ROD ATTACHMENTS & APPROVED C
- Page 59 and 60: HANGER ROD SWIVEL ATTACHMENTS A 2 3
- Page 61 and 62: APPROVED COMPONENTS SC228 HANGER RO
- Page 63 and 64: APPROVED COMPONENTS NOTE: B633 can
- Page 65 and 66: APPROVED COMPONENTS Hardware SEISMI
- Page 67 and 68: APPROVED COMPONENTS 'A' (Rod Size)
- Page 69 and 70: APPROVED COMPONENTS 'A' (Rod Size)
- Page 71 and 72: APPROVED COMPONENTS Copper Adjustab
- Page 73 and 74: APPROVED COMPONENTS Vertical Load S
- Page 75 and 76: APPROVED COMPONENTS Seismic Approva
- Page 77 and 78: APPROVED COMPONENTS 'A 'T' 2 'A 'T'
- Page 79: APPROVED COMPONENTS 2” (50.8mm) 3
- Page 83 and 84: APPENDIX - SEISMIC MAP SEISMIC MAP
- Page 85 and 86: Appendix 1 Support Spacing for Sing
- Page 87 and 88: SUPPORT SPACING FOR SINGLE ROD HANG
- Page 89 and 90: SUPPORT SPACING FOR SINGLE ROD HANG
- Page 91 and 92: SUPPORT SPACING FOR SINGLE ROD HANG
- Page 93 and 94: SUPPORT SPACING FOR SINGLE ROD HANG
- Page 95 and 96: SUPPORT SPACING FOR SINGLE ROD HANG
- Page 97 and 98: SUPPORT SPACING FOR SINGLE ROD HANG
- Page 99 and 100: SUPPORT SPACING FOR SINGLE ROD HANG
- Page 101 and 102: SUPPORT SPACING FOR SINGLE ROD HANG
- Page 103 and 104: SUPPORT SPACING FOR SINGLE ROD HANG
- Page 105 and 106: SUPPORT SPACING FOR SINGLE ROD HANG
- Page 107 and 108: SUPPORT SPACING FOR SINGLE ROD HANG
- Page 109 and 110: SUPPORT SPACING FOR SINGLE ROD HANG
- Page 111 and 112: Appendix 2 Seismic Bracing Charts f
- Page 113 and 114: TRAPEZE BRACING Seismic Bracing Cha
- Page 115 and 116: TRAPEZE BRACING Seismic Bracing Cha
- Page 117 and 118: Seismic Bracing Charts for Trapeze
- Page 119 and 120: TRAPEZE BRACING Seismic Bracing Cha
- Page 121 and 122: TRAPEZE BRACING Seismic Bracing Cha
- Page 123 and 124: Seismic Bracing Charts for Trapeze
- Page 125 and 126: TRAPEZE BRACING Seismic Bracing Cha
- Page 127 and 128: TRAPEZE BRACING Seismic Bracing Cha
- Page 129 and 130: Seismic Bracing Charts for Trapeze
APPROVED COMPONENTS<br />
CONCRETE INSERT<br />
2 9 /16"<br />
(65mm)<br />
4"<br />
(101mm)<br />
1 1 /2"<br />
(38mm)<br />
1 5 /8"<br />
(41mm)<br />
B3332<br />
End Cap<br />
Styrofoam<br />
Filler<br />
1 3 /8"<br />
(35mm)<br />
B32I-8<br />
1 5 /8"<br />
(41mm)<br />
2 7 /8"<br />
(73mm)<br />
1 3 /8"<br />
(35mm)<br />
11 /16"<br />
(17mm)<br />
3/4"<br />
(19mm)<br />
.188 (4.8mm) Knockouts<br />
for Nailing Inserts to<br />
Forms<br />
Styrofoam Filler<br />
Part No. Length Design Load*<br />
in. (mm) lbs. (kN)<br />
B32I-8 8" (203) 1200 (5.34)<br />
B32I-12 12" (305) 2000 (8.89)<br />
B32I-16 16" (406) 2000 (8.89)<br />
B32I-20 20" (508) 2000 (8.89)<br />
B32I-24 24" (609) 2000 (8.89)<br />
B32I-32 32" (813) 2000 (8.89)<br />
B206 End Caps<br />
B32I-12 thru B32I-240<br />
<strong>Seismic</strong> Approval:<br />
Structure Attachment<br />
Material: 12 Ga. (2.6mm)<br />
B32I-40 40" (914) 2000 (8.89)<br />
B32I-48 48" (1219) 2000 (8.89)<br />
B32I-60 60" (1524) 2000 (8.89)<br />
B32I-72 72" (1829) 2000 (8.89)<br />
B32I-84 84" (2133) 2000 (8.89)<br />
B32I-96 96" (2438) 2000 (8.89)<br />
B32I-108 108" (2743) 2000 (8.89)<br />
B32I-120 120" (3048) 2000 (8.89)<br />
B32I-144 144" (3657) 2000 (8.89)<br />
B32I-168 168" (4267) 2000 (8.89)<br />
B32I-192 192" (4877) 2000 (8.89)<br />
B32I-216 216" (5486) 2000 (8.89)<br />
B32I-240 240" (6096) 2000 (8.89)<br />
Loads concentrated within the last 2" (51mm) of<br />
concrete inserts 8" (203mm) and longer should not<br />
exceed 1000 Lbs. (4.45kN).<br />
Concrete inserts should be secured to forms on<br />
16" (406mm) to 24" (609mm) intervals.<br />
B32I continuous concrete inserts are made from<br />
B32 channel. Use channel nuts designed for use in<br />
B32 channel.<br />
Styrofoam fillers are supplied with all B32I concrete<br />
inserts. B3332 end caps are furnished with inserts<br />
through 16" (406mm) long, and B206 end caps are<br />
furnished with inserts over 16" (406mm) long.<br />
* Continuous insert allowable load per foot of<br />
insert - 2000 lbs. (8.89kN) in 3000 psi (20.7MPa)<br />
normal weight concrete.<br />
COOPER B-<strong>Line</strong><br />
509 West Monroe Street<br />
Highland, Illinois 62249<br />
Phone: 800-851-7415<br />
Fax: 618-654-1917<br />
Date:<br />
Page No.<br />
Sheet Number:<br />
6 - 2 - 06<br />
77<br />
of<br />
Raafat S. Aboulhosn<br />
Structural Engineer S 3913