TL-WR542G 54M Wireless Router - TP-Link
TL-WR542G 54M Wireless Router - TP-Link TL-WR542G 54M Wireless Router - TP-Link
IP Address 202.96.134.12, while other PC(s) have no limit you should specify the following IP address filtering list: 4.8.3 Domain Filtering The Domain Filtering page (shown in Figure 4-37) allows you to control access to certain websites on the Internet by specifying their domains or key words. Figure 4-37 Domain Filtering Before adding a Domain Filtering entry, you must ensure that Enable Firewall and Enable Domain Filtering have been selected on the Firewall page. To Add a Domain filtering entry, click the Add New… button. The page "Add or Modify a Domain Filtering entry" will appear, shown in Figure 4-38: Figure 4-38 Add or Modify a Domain Filtering entry To add or modify a Domain Filtering entry, follow these instructions: 1. Effective Time - Enter a range of time in HHMM format specifying the time for the entry to take effect. For example, if you enter: 0803 - 1705, than the entry will take effect from 08:03 49
to 17:05. 2. Domain Name - Type the domain or key word as desired in the field. A blank in the domain field means all websites on the Internet. For example: www.xxyy.com.cn, .net. 3. Status - Select Enabled or Disabled for this entry on the Status pull-down list. 4. Click the Save button to save this entry. To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. 2. Modify the information. 3. Click the Save button. Click the Enabled All button to make all entries enabled. Click the Disabled All button to make all entries disabled. Click the Delete All button to delete all entries Click the Next button to go to the next page and the Previous button to return to the previous page. For example, if you want to block the PC(s) on your LAN to access websites www.xxyy.com.cn, www.aabbcc.com and websites with .net in the end on the Internet while no limit for other websites, you should specify the following Domain filtering list: 4.8.4 MAC Address Filtering Like the IP Address Filtering page, the MAC Address Filtering page (shown in Figure 4-39) allows you to control access to the Internet by users on your local network based on their MAC Address. 50
- Page 5 and 6: For the following equipment: TP-LIN
- Page 7 and 8: 4.8 Security ......................
- Page 9 and 10: Chapter 1. Introduction Thank you f
- Page 11 and 12: Figure 1-1 Front Panel sketch Name
- Page 13 and 14: Chapter 2. Connecting the Router 2.
- Page 15 and 16: Chapter 3. Quick Installation Guide
- Page 17 and 18: If the router's IP address is 192.1
- Page 19 and 20: Figure 3-8 Quick Setup - Static IP
- Page 21 and 22: menus on the left of the Web-based
- Page 23 and 24: 4.4 Network Figure 4-2 the Network
- Page 25 and 26: If you get address and find error w
- Page 27 and 28: Time-based Connecting function can
- Page 29 and 30: Click Logout to end 802.1X authenti
- Page 31 and 32: ‣ Connect Automatically - Connect
- Page 33 and 34: Figure 4-12 PPTP Settings ‣ User
- Page 35 and 36: Click Restore Factory MAC to restor
- Page 37 and 38: Note Dialog Note: Limited by local
- Page 39 and 40: format stands for any combination o
- Page 41 and 42: ‣ Privilege - Select the privileg
- Page 43 and 44: pull-down list, enter 2F34D20BE2E54
- Page 45 and 46: ‣ Address Lease Time - The Addres
- Page 47 and 48: 2. Modify the information. 3. Click
- Page 49 and 50: 3. Click the Save button. Click the
- Page 51 and 52: There are many popular applications
- Page 53 and 54: 4.8 Security Figure 4-33 The Securi
- Page 55: 1. Effective Time - Enter a range o
- Page 59 and 60: To modify or delete an existing ent
- Page 61 and 62: etween 5 ~ 3600 packets. When the c
- Page 63 and 64: Click the Enable All button to make
- Page 65 and 66: 4.11.1 Binding Setting This page di
- Page 67 and 68: • MAC Address - The MAC address o
- Page 69 and 70: Figure 4-52 Oray.net DDNS Settings
- Page 71 and 72: There are nine submenus under the S
- Page 73 and 74: 1. Do not turn off the router or pr
- Page 75 and 76: Figure 4-60 Password It is recommen
- Page 77 and 78: Figure 4-63 Statistics ‣ Current
- Page 79 and 80: Appendix A: FAQ 1. How do I configu
- Page 81 and 82: Figure A-5 Add or Modify a Virtual
- Page 83 and 84: 3) Make sure the wireless stations
- Page 85 and 86: Figure 0-2 5) The following TCP/IP
- Page 87 and 88: Now: Click OK to keep your settings
- Page 89 and 90: Appendix D: Glossary ‣ 2x to 3x e
IP Address 202.96.134.12, while other PC(s) have no limit you should specify the following IP<br />
address filtering list:<br />
4.8.3 Domain Filtering<br />
The Domain Filtering page (shown in Figure 4-37) allows you to control access to certain websites<br />
on the Internet by specifying their domains or key words.<br />
Figure 4-37 Domain Filtering<br />
Before adding a Domain Filtering entry, you must ensure that Enable Firewall and Enable<br />
Domain Filtering have been selected on the Firewall page. To Add a Domain filtering entry, click<br />
the Add New… button. The page "Add or Modify a Domain Filtering entry" will appear, shown<br />
in Figure 4-38:<br />
Figure 4-38 Add or Modify a Domain Filtering entry<br />
To add or modify a Domain Filtering entry, follow these instructions:<br />
1. Effective Time - Enter a range of time in HHMM format specifying the time for the entry to<br />
take effect. For example, if you enter: 0803 - 1705, than the entry will take effect from 08:03<br />
49