TL-WR542G 54M Wireless Router - TP-Link
TL-WR542G 54M Wireless Router - TP-Link TL-WR542G 54M Wireless Router - TP-Link
2. Access the AP's Web-based utility and configure the AP under Bridge mode, then input 00-13-56-A8-9E-1A in corresponding Blank. ‣ Enable Wireless Security – The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the router without encryption. It is recommended strongly that you choose this option to encrypt your wireless network. The encryption settings are described below. ‣ Authentication Type - You can select one of the following authentication types: • WEP - Select WEP authentication type based on 802.11 authentications. • WPA-PSK/WPA2-PSK - Select WPA/WPA2 authentication type based on pre-shared passphrase. • WPA /WPA2 - Select WPA/WPA2 authentication type based on Radius Server. ‣ Authentication Options - You can select one of the following authentication options: • When you select WEP for authentication type you can select the following authentication options: • Automatic - Select Shared Key or Open System authentication type automatically based on the wireless station request. • Shared Key - Select 802.11 Shared Key authentication. • Open System - Select 802.11 Open System authentication. • When you select WPA-PSK/WPA2-PSK for authentication type you can select Automatic, WPA –PSK or WPA2-PSK as authentication options. • When you select WPA/WPA2 as an authentication type you can select Automatic WPA or WPA2 as authentication option. ‣ WEP Key Format - You can select ASCII or Hexadecimal format. ASCII Code Format stands for any combination of keyboard characters in the specified length. Hexadecimal 31
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length. ‣ WEP Key settings - Select which of the four keys will be used and enter the matching WEP key information for your network in the selected key radio button. These values must be identical on all wireless stations in your network. ‣ Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit) for encryption. "Disabled" means the WEP key entry is invalid. • For 64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 5 ASCII characters. • For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 13 ASCII characters. • For 152-bit encryption - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 16 ASCII characters. ‣ Encryption - When you select WPA-PSK/WPA2-PSK or WPA/WPA2 for Authentication Type you can select Automatic, TKIP or AES as Encryptions. Figure 4-16 WPA-PSK/WPA2-PSK ‣ WPA-PSK/WPA2-PSK Passphrase - You can enter a WPA or WPA2 passphrase between 8 and 63 characters long. ‣ Group Key Update Period - Specify the group key update interval in seconds. The value can be either 0 seconds or from 30 seconds and up, 1-29 seconds are not usable figures. Enter 0 to disable the update. 32
- Page 1 and 2: TL-WR542G 54M Wireless Router Rev:
- Page 3 and 4: FCC STATEMENT This equipment has be
- Page 5 and 6: For the following equipment: TP-LIN
- Page 7 and 8: 4.8 Security ......................
- Page 9 and 10: Chapter 1. Introduction Thank you f
- Page 11 and 12: Figure 1-1 Front Panel sketch Name
- Page 13 and 14: Chapter 2. Connecting the Router 2.
- Page 15 and 16: Chapter 3. Quick Installation Guide
- Page 17 and 18: If the router's IP address is 192.1
- Page 19 and 20: Figure 3-8 Quick Setup - Static IP
- Page 21 and 22: menus on the left of the Web-based
- Page 23 and 24: 4.4 Network Figure 4-2 the Network
- Page 25 and 26: If you get address and find error w
- Page 27 and 28: Time-based Connecting function can
- Page 29 and 30: Click Logout to end 802.1X authenti
- Page 31 and 32: ‣ Connect Automatically - Connect
- Page 33 and 34: Figure 4-12 PPTP Settings ‣ User
- Page 35 and 36: Click Restore Factory MAC to restor
- Page 37: Note Dialog Note: Limited by local
- Page 41 and 42: ‣ Privilege - Select the privileg
- Page 43 and 44: pull-down list, enter 2F34D20BE2E54
- Page 45 and 46: ‣ Address Lease Time - The Addres
- Page 47 and 48: 2. Modify the information. 3. Click
- Page 49 and 50: 3. Click the Save button. Click the
- Page 51 and 52: There are many popular applications
- Page 53 and 54: 4.8 Security Figure 4-33 The Securi
- Page 55 and 56: 1. Effective Time - Enter a range o
- Page 57 and 58: to 17:05. 2. Domain Name - Type the
- Page 59 and 60: To modify or delete an existing ent
- Page 61 and 62: etween 5 ~ 3600 packets. When the c
- Page 63 and 64: Click the Enable All button to make
- Page 65 and 66: 4.11.1 Binding Setting This page di
- Page 67 and 68: • MAC Address - The MAC address o
- Page 69 and 70: Figure 4-52 Oray.net DDNS Settings
- Page 71 and 72: There are nine submenus under the S
- Page 73 and 74: 1. Do not turn off the router or pr
- Page 75 and 76: Figure 4-60 Password It is recommen
- Page 77 and 78: Figure 4-63 Statistics ‣ Current
- Page 79 and 80: Appendix A: FAQ 1. How do I configu
- Page 81 and 82: Figure A-5 Add or Modify a Virtual
- Page 83 and 84: 3) Make sure the wireless stations
- Page 85 and 86: Figure 0-2 5) The following TCP/IP
- Page 87 and 88: Now: Click OK to keep your settings
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified<br />
length.<br />
‣ WEP Key settings - Select which of the four keys will be used and enter the matching WEP<br />
key information for your network in the selected key radio button. These values must be<br />
identical on all wireless stations in your network.<br />
‣ Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit) for encryption.<br />
"Disabled" means the WEP key entry is invalid.<br />
• For 64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9, a-f,<br />
A-F, zero key is not permitted) or 5 ASCII characters.<br />
• For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of 0-9,<br />
a-f, A-F, zero key is not permitted) or 13 ASCII characters.<br />
• For 152-bit encryption - You can enter 32 hexadecimal digits (any combination of 0-9,<br />
a-f, A-F, zero key is not permitted) or 16 ASCII characters.<br />
‣ Encryption - When you select WPA-PSK/WPA2-PSK or WPA/WPA2 for Authentication<br />
Type you can select Automatic, TKIP or AES as Encryptions.<br />
Figure 4-16 WPA-PSK/WPA2-PSK<br />
‣ WPA-PSK/WPA2-PSK Passphrase - You can enter a WPA or WPA2 passphrase between<br />
8 and 63 characters long.<br />
‣ Group Key Update Period - Specify the group key update interval in seconds. The value<br />
can be either 0 seconds or from 30 seconds and up, 1-29 seconds are not usable figures.<br />
Enter 0 to disable the update.<br />
32