TL-WR542G 54M Wireless Router - TP-Link
TL-WR542G 54M Wireless Router - TP-Link TL-WR542G 54M Wireless Router - TP-Link
‣ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ‣ Dynamic IP/ Static IP – Choose either as you are given by your ISP. Click the Connect button to connect immediately. Click the Disconnect button to disconnect immediately. ‣ Connect on Demand - You can configure the router to disconnect from your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications is visiting the Internet continually in the background. ‣ Connect Automatically - Connect automatically after the router is disconnected. To use this option, click the radio button. ‣ Connect Manually - You can configure the router to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the router will disconnect from your Internet connection, and you will not be able to re-establish your connection automatically as soon as you attempt to access the Internet again. To use this option, click the radio button. If you want your Internet connection to remain active at all times, enter "0" in the Max Idle Time field. Otherwise, enter the number in minutes that you wish to have the Internet connecting last unless a new link is requested. Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications is visiting the Internet continually in the background. 8. If you choose PPTP, you should enter the following parameters (Figure 4-12): 25
Figure 4-12 PPTP Settings ‣ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ‣ Dynamic IP/ Static IP – Choose either as you are given by your ISP and enter the ISP’s IP address or the domain name. If you choose static IP and enter the domain name, you should also enter the DNS assigned by your ISP. And click the Save button. Click the Connect button to connect immediately. Click the Disconnect button to disconnect immediately. ‣ Connect on Demand - You can configure the router to disconnect from your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, 26
- Page 1 and 2: TL-WR542G 54M Wireless Router Rev:
- Page 3 and 4: FCC STATEMENT This equipment has be
- Page 5 and 6: For the following equipment: TP-LIN
- Page 7 and 8: 4.8 Security ......................
- Page 9 and 10: Chapter 1. Introduction Thank you f
- Page 11 and 12: Figure 1-1 Front Panel sketch Name
- Page 13 and 14: Chapter 2. Connecting the Router 2.
- Page 15 and 16: Chapter 3. Quick Installation Guide
- Page 17 and 18: If the router's IP address is 192.1
- Page 19 and 20: Figure 3-8 Quick Setup - Static IP
- Page 21 and 22: menus on the left of the Web-based
- Page 23 and 24: 4.4 Network Figure 4-2 the Network
- Page 25 and 26: If you get address and find error w
- Page 27 and 28: Time-based Connecting function can
- Page 29 and 30: Click Logout to end 802.1X authenti
- Page 31: ‣ Connect Automatically - Connect
- Page 35 and 36: Click Restore Factory MAC to restor
- Page 37 and 38: Note Dialog Note: Limited by local
- Page 39 and 40: format stands for any combination o
- Page 41 and 42: ‣ Privilege - Select the privileg
- Page 43 and 44: pull-down list, enter 2F34D20BE2E54
- Page 45 and 46: ‣ Address Lease Time - The Addres
- Page 47 and 48: 2. Modify the information. 3. Click
- Page 49 and 50: 3. Click the Save button. Click the
- Page 51 and 52: There are many popular applications
- Page 53 and 54: 4.8 Security Figure 4-33 The Securi
- Page 55 and 56: 1. Effective Time - Enter a range o
- Page 57 and 58: to 17:05. 2. Domain Name - Type the
- Page 59 and 60: To modify or delete an existing ent
- Page 61 and 62: etween 5 ~ 3600 packets. When the c
- Page 63 and 64: Click the Enable All button to make
- Page 65 and 66: 4.11.1 Binding Setting This page di
- Page 67 and 68: • MAC Address - The MAC address o
- Page 69 and 70: Figure 4-52 Oray.net DDNS Settings
- Page 71 and 72: There are nine submenus under the S
- Page 73 and 74: 1. Do not turn off the router or pr
- Page 75 and 76: Figure 4-60 Password It is recommen
- Page 77 and 78: Figure 4-63 Statistics ‣ Current
- Page 79 and 80: Appendix A: FAQ 1. How do I configu
- Page 81 and 82: Figure A-5 Add or Modify a Virtual
Figure 4-12 PP<strong>TP</strong> Settings<br />
‣ User Name/Password - Enter the User Name and Password provided by your ISP. These<br />
fields are case-sensitive.<br />
‣ Dynamic IP/ Static IP – Choose either as you are given by your ISP and enter the ISP’s IP<br />
address or the domain name.<br />
If you choose static IP and enter the domain name, you should also enter the DNS assigned<br />
by your ISP. And click the Save button.<br />
Click the Connect button to connect immediately. Click the Disconnect button to disconnect<br />
immediately.<br />
‣ Connect on Demand - You can configure the router to disconnect from your Internet<br />
connection after a specified period of inactivity (Max Idle Time). If your Internet connection<br />
has been terminated due to inactivity, Connect on Demand enables the router to<br />
automatically re-establish your connection as soon as you attempt to access the Internet<br />
again. If you wish to activate Connect on Demand, click the radio button. If you want your<br />
Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise,<br />
26
Change language