TL-WR542G 54M Wireless Router - TP-Link
TL-WR542G 54M Wireless Router - TP-Link
TL-WR542G 54M Wireless Router - TP-Link
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4.4 Network<br />
Figure 4-2 the Network menu<br />
There are three submenus under the Network menu (shown in Figure 4-2): LAN, WAN and MAC<br />
Clone. Click any of them, and you will be able to configure the corresponding function. The<br />
detailed explanations for each submenu are provided below.<br />
4.4.1 LAN<br />
You can configure the IP parameters of LAN on this page.<br />
Figure 4-3 LAN<br />
‣ MAC Address - The physical address of the router, as seen from the LAN. The value can't<br />
be changed.<br />
‣ IP Address - Enter the IP address of your router in dotted-decimal notation (factory default:<br />
192.168.1.1).<br />
‣ Subnet Mask - An address code that determines the size of the network. Normally use<br />
255.255.255.0 as the subnet mask.<br />
Note:<br />
If you change the IP Address of LAN, you must use the new IP Address to login the router.<br />
If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP<br />
server will not take effect, until they are re-configured.<br />
If the new LAN IP Address you set is not in the same subnet, the Virtual Server and DMZ Host will<br />
change accordingly at the same time.<br />
4.4.2 WAN<br />
You can configure the WAN port parameters on this page.<br />
16