TL-WR542G 54M Wireless Router - TP-Link

More documents

Recommendations

Info

Figure 4-1 <strong>Router</strong> Status 4.3 Quick Setup Please refer to Section 3.2: "Quick Installation Guide." 15
4.4 Network Figure 4-2 the Network menu There are three submenus under the Network menu (shown in Figure 4-2): LAN, WAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.4.1 LAN You can configure the IP parameters of LAN on this page. Figure 4-3 LAN ‣ MAC Address - The physical address of the router, as seen from the LAN. The value can't be changed. ‣ IP Address - Enter the IP address of your router in dotted-decimal notation (factory default: 192.168.1.1). ‣ Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. Note: If you change the IP Address of LAN, you must use the new IP Address to login the router. If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP server will not take effect, until they are re-configured. If the new LAN IP Address you set is not in the same subnet, the Virtual Server and DMZ Host will change accordingly at the same time. 4.4.2 WAN You can configure the WAN port parameters on this page. 16
Page 1 and 2: TL-WR542G 54M Wireless Router Rev:
Page 3 and 4: FCC STATEMENT This equipment has be
Page 5 and 6: For the following equipment: TP-LIN
Page 7 and 8: 4.8 Security ......................
Page 9 and 10: Chapter 1. Introduction Thank you f
Page 11 and 12: Figure 1-1 Front Panel sketch Name
Page 13 and 14: Chapter 2. Connecting the Router 2.
Page 15 and 16: Chapter 3. Quick Installation Guide
Page 17 and 18: If the router's IP address is 192.1
Page 19 and 20: Figure 3-8 Quick Setup - Static IP
Page 21: menus on the left of the Web-based
Page 25 and 26: If you get address and find error w
Page 27 and 28: Time-based Connecting function can
Page 29 and 30: Click Logout to end 802.1X authenti
Page 31 and 32: ‣ Connect Automatically - Connect
Page 33 and 34: Figure 4-12 PPTP Settings ‣ User
Page 35 and 36: Click Restore Factory MAC to restor
Page 37 and 38: Note Dialog Note: Limited by local
Page 39 and 40: format stands for any combination o
Page 41 and 42: ‣ Privilege - Select the privileg
Page 43 and 44: pull-down list, enter 2F34D20BE2E54
Page 45 and 46: ‣ Address Lease Time - The Addres
Page 47 and 48: 2. Modify the information. 3. Click
Page 49 and 50: 3. Click the Save button. Click the
Page 51 and 52: There are many popular applications
Page 53 and 54: 4.8 Security Figure 4-33 The Securi
Page 55 and 56: 1. Effective Time - Enter a range o
Page 57 and 58: to 17:05. 2. Domain Name - Type the
Page 59 and 60: To modify or delete an existing ent
Page 61 and 62: etween 5 ~ 3600 packets. When the c
Page 63 and 64: Click the Enable All button to make
Page 65 and 66: 4.11.1 Binding Setting This page di
Page 67 and 68: • MAC Address - The MAC address o
Page 69 and 70: Figure 4-52 Oray.net DDNS Settings
Page 71 and 72: There are nine submenus under the S
Page 73 and 74:
1. Do not turn off the router or pr
Page 75 and 76:
Figure 4-60 Password It is recommen
Page 77 and 78:
Figure 4-63 Statistics ‣ Current
Page 79 and 80:
Appendix A: FAQ 1. How do I configu
Page 81 and 82:
Figure A-5 Add or Modify a Virtual
Page 83 and 84:
3) Make sure the wireless stations
Page 85 and 86:
Figure 0-2 5) The following TCP/IP
Page 87 and 88:
Now: Click OK to keep your settings
Page 89 and 90:
Appendix D: Glossary ‣ 2x to 3x e
show all

TL-WR542G 54M Wireless Router - TP-Link

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?