THERMO - CeramTec
THERMO - CeramTec
THERMO - CeramTec
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Mechanical Systems Division<br />
<strong>THERMO</strong><br />
Technical data<br />
Comfort Zone<br />
from hot to cold<br />
from cold to hot<br />
Nut torque<br />
Max. opening angle 25°<br />
Max. mixing angle 95°<br />
Min. faucet handle length<br />
Max. static pressure<br />
Burst pressure<br />
10 Nm ± 2 Nm<br />
25 mm<br />
10 bar<br />
>70 bar<br />
Life cycle EN817 70.000 cycles<br />
ASME 112.18.1 M<br />
Max. hot water temperature 90 °C<br />
Temperature stability open/close
triduon ® thermo<br />
“Controlled Gap”<br />
(*) in usage of check valves Ø 7,5 -0,5<br />
Optional features available. For detailed information please<br />
refer to our leaflet “triduon ® – Optional features” (No. ST100020).<br />
KTW<br />
ACS<br />
T H E C E R A M I C E X P E R T S<br />
W270<br />
<strong>CeramTec</strong> GmbH<br />
Mechanical Systems Division<br />
Luitpoldstraße 15<br />
91207 Lauf, Germany<br />
Phone: +49 9123 77-436<br />
Fax: +49 9123 77-464<br />
mechanical_systems@ceramtec.de<br />
www.triduon.com<br />
ST100019 • EN • 1.000 • 1302 • atio (3342) • Printed in Germany<br />
This brochure is a general overview of our present state of knowledge and is intended to provide general information and general recommendations regarding our products<br />
and their uses. It is subject to change. It is expressly not a guarantee or warrantee of any specific properties of the products and/or materials described or their suitability for a<br />
particular application. Any existing industrial property rights must be observed. The quality of our products is assured under our Conditions of Sale.
Change language