NEW PRODUCT NEWS - Yorkville Sound

NEW PRODUCT NEWS
2014
yorkville.com

Active Loudspeaker Series
NOW SHIPPING!
Our Most Powerful, Best
Sounding, Lightweight
Powered Speakers!
PS15P
1400 watts program - 4400 watts peak
PS12P
1400 watts program - 4400 watts peak
PS10P
800 watts program - 1600 watts peak
FEATURES
❑ Large Conical Horns for Improved Constant Directivity and
Midrange Response
❑ Switching Power Supply for Reduced Weight
❑ High Efficiency Class-D Amplifiers
❑ Die-Cast Chassis with Integrated Passive Cooling (No Fan Required)
❑ Integrated Two Channel Mini Mixer with XLR Microphone, 1/4-inch
and RCA Line Inputs
❑ Multiband Limiting Delivers Transparent Listening Experience
(Vocals Are Not Modulated By Bass)
❑ Switchable Bass Boost Delivers Additional 6db Below 300Hz
Without Sacrificing Midrange Headroom
❑ Switchable High Pass Filter for use with Subwoofers
❑ Acoustically Transparent Grille for Improved High Frequency Output
❑ Improved Port Design for Lower Vent Noise
❑ Proudly Made in Canada
PS18S
1200 watts program - 2400 watts peak
PS15S
1000 watts program - 2000 watts peak
New For 2014
Active Subwoofer Series
Our most powerful yet compact
powered subwoofers to date!
PS12S
900 watts program - 1800 watts peak

AP4K
AudioPro
Power Amplifier
Capable of delivering 1800 watts per channel into either a 2 or 4 ohm load, Yorkville
Sound's new AudioPro AP4K uses proven Class-H technology and advanced protection
circuitry to provide unmatched long term reliability in the field.
An impedance mode switch on the back panel of the amplifier allows the user to
select full output power into either a two or four ohm load for maximum application
flexibility. This means this compact two rack space amplifier can deliver up to 3600
watts of clean, pure power into either 4 or 8 ohm loads (bridged), making it a perfect
solution for virtually any touring live sound, club system or installation.
The internal signal path has been optimized and a toroidal transformer is used in the
AP4K design - both serving to reduce hum and noise in practical real-world
applications. It's three-tier Class-H design approaches efficiency normally associated
with Class-D technology; yet provides the superior transient response and low
distortion of the best analog designs.
❑ Delivers 1800 watts per channel into either 2 or 4 ohm load
(3600 watts bridged into 4 or 8 ohms)
❑ Proven Ultra Reliable Class-H Design
❑ Easily Handles Reactive Phase Shifted Loads
❑ Advanced Protection Schemes Including DC Current, Load,
Thermal & Breaker Protection
❑ Transparent User-Defeatable Peak Limiter Circuits
❑ Soft Turn-On Circuit Protects Speakers and Prevents Nuisance
Breaker Tripping During Power Up
❑ Concise Front Panel Metering and Status LED's
❑ Speakon and Binding Post Outputs
❑ Balanced XLR and 1/4-inch TRS Inputs
❑ All-Steel Chassis Construction
❑ Made in Canada
YX Series
Cost Effective Loudspeakers
Now Made in Canada
Delivering impressive performance in the most cost effective cabinets we can offer,
Yorkville Sound is in the process of re-shoring our YX Series Cabinets back to our
manufacturing facility in Toronto, Ontario, Canada. This means we are now able to
offer improved quality and reliability in a North American made product at
competitive prices.
The new North American Yorkville built products include the best selling 12-inch and horn
YX12C, the 300-watt 15-inch YX15C, the active YX15PC, the passive YX18SC subwoofer
as well as the YX12M dedicated floor monitor.

NX25P-2
Improved Active Loudspeaker
The revamped NX25P-2 offers the best value in a
12-inch and horn active loudspeaker cabinet. The
bi-amped 300-watt program power module has a
minimum of controls yet provides maximum
versatility making the NX25P-2 the ideal solution
for many applications.
❑ 300 Watt program - 600 Watt peak
❑ Max SPL 124dB Peak (120dB Continuous)
❑ XLR Microphone Input w/ Gain Control
❑ Combi-jack XLR & 1/4-inch TRS Line
Input w/ Gain Control
❑ Two Band EQ
❑ XLR Thru-put
Two-band EQ, XLR balanced microphone input as
will as balanced combi-jack line input on the
power module means the NX25P-2 can be easily
connected to any source and quickly EQ balanced
for the room.
❑ Dual Purpose Cabinet Design
(Front-of House or Monitor Orientation)
❑ Integrated Flying Points for
Installation Applications
❑ Recessed Control / Input Panel
❑ Made in Canada
NX300P
15-inch 600-watt Active Loudspeaker
The new NX300P offers exceptional value in a
15-inch and horn active loudspeaker cabinet. The
bi-amped 300-watt program power module has
efficient, easy to use controls making the NX300P
the ideal solution for many applications.
Effective High / Low EQ, XLR balanced microphone
input as will as an XLR / TRS 1/4-inch balanced
combi-jack line input on the power module means
the NX300P can be easily connected to any source
and quickly EQ balanced for the room. An XLR
balanced line output allows multiple NX300P's to
be linked together for use in an array or for easy
distribution around a large room when used as
repeater cabinets.
❑ 300 Watt program - 600 Watt peak
❑ Max SPL 125dB Peak (122dB Continuous)
❑ Dual purpose full range and wedge
monitor format enclosure
❑ Combi-jack XLR/1/4-inch TRS inputs
❑ XLR output for easy connection and looping
❑ Direct microphone input with level control
❑ 1.4 inch High Frequency Driver (1-inch exit)
❑ Integrated Flypoints
❑ Recessed Control panel
❑ Made in Canada
NX55P-2
Redesigned Active Loudspeaker
Yorkville Sound’s best selling fully featured flagship active loudspeaker has been redesigned
for 2014. A new power amplifier design delivers 1000 watts program - 2000 watts peak
making it our best performing, most versatile cabinet in the NX Series.
❑ 1000 Watts program - 2000 Watt peak
❑ Max SPL 131dB Peak / 125dB Continuous
❑ Dual purpose full range and wedge
monitor format enclosure
❑ Lightweight, high efficiency, high tech
bi-amped power module
❑ +/- 6dB input trim control for individual
cabinet level adjustment
❑ XLR and TRS inputs / outputs for easy
connection and looping
❑ Multi-input source mixer for direct inputs
❑ Direct microphone input with level control
❑ Two-way overall EQ controls
❑ Recessed Mixer panel
❑ Made in Canada

YBA-1Mod1
All Tube Guitar Head
The Traynor YBA1 Mod1 is the perfect amp for
the discerning player who appreciates incredible
boutique tube tone, but doesn't appreciate
typical boutique amp pricing. Building on the
popular (and highly sought after) Traynor
Limited Edition 50th Anniversary Traynor YBA-1
head, the YBA1 Mod 1 uses three hand selected
12AX7 preamp tubes and two EL34 power tubes
in a Class-AB design to deliver a purely classic
guitar sound.
The two separate input channels on the YBA1
Mod 1 each have their own gain and character.
The channels can be blended in parallel, or
simply pull Channel Two Volume pot to run
both channels in series for additional gain, with
Channel Two Volume now acting as a master
volume for the amp.
YBX212
Extension Cabinet
Built as the perfect companion for the Traynor
YBA-1Mod1 Head, the 120-watt Traynor YBX212
extension cabinet delivers massive tone in a
compact 1/2-stack package. Loaded with a pair
Four shared tone controls (Treble, Bass, High
and Low Range Expanders) make it easy to dial
in your perfect sound. While 'Treble' and 'Bass'
act as traditional tone controls, the Range
Expanders function more as 'Mid' and
'Presence' controls, offering more dimension
and versatility to the YBA1 Mod 1.
An output attenuator located on the back of
the head allows the Traynor YBA-1 Mod 1 Head
to be tamed for use in studio, rehearsal hall or
smaller stages. Five level settings (at 40, 20, 5,
1.0 and 0.1 watts) allow the master level to be
controlled while leaving the characteristic tone
of the amp relatively unchanged, even at
bedroom volume.
of 12-inch Celestion Vintage30’s in a vertical
slanted cabinet design, the YBX212 delivers
massive projection tone in an affordable, more
manageable cabinet solution.
YBA-1 FEATURES
❑ Class-AB All Tube Design
❑ Hand Selected 12AX7 Preamp Tubes (x3) and EL34 Power Tubes (x2)
❑ Two Individually Voiced Input Channels
❑ Channels Can Be Blended in Parallel or Run in Series for Higher Gain
❑ Push Pull Pot on Channel Two for Series / Parallel Mode
❑ Channel Two Gain Control Acts as Master Volume in Series Mode
❑ Traditional Tone Controls with Traynor Low and High Expanders
❑ Output Power Attenuator (40, 20, 5, 1 and 0.1 watts)
❑ Made in Canada
YBX212 FEATURES
❑ 150 watts (8 Ohms)
❑ Innovative Vertical 2 x 12-inch Slant Cabinet Design
❑ Delivers Massive Tone and Maximum Projection
❑ Loaded with Celestion Vintage30’s
❑ Solid Plywood Cabinet Construction
❑ Made in Canada

Small Block Bass Heads
SB200H
At less than 7 1/2 inches (20cm) wide and weighing
under 1.5lbs (680g), the SB200H is small in stature,
but big on tone. Designed to withstand the rigors of
the road, the SB200H is built using an all-metal
chassis with front mounted handles to protect the
knobs and jacks.
Printed In Canada
A combination Speakon - 1/4-inch speaker
output jack ensures the SB200H is included for
maximum convenience.
❑ 200 watts (4 Ohms)
❑ Ultra Compact and Lightweight Design (1.5lbs/0.68kg)
❑ All-Metal Chassis
❑ Versatile 4-band EQ with Additional Low Frequency Expander
❑ Passive and Active Inputs
❑ Selectable Pre / Post XLR DI Output
❑ Auxiliary Input & Headphone Output for Private Practice
❑ Convenient Speakon - 1/4-inch Combi-jack Speaker Output
❑ Made in Canada
The ultra compact and lightweight Traynor Small Block bass heads are built for the travelling musician. Loaded with essential features including Active and Passive
level instrument inputs XLR DI output, a versatile four band EQ with an additional low frequency expander, a player can dial in any tone quickly and easily. Low
Frequency Expander allows the player to perfectly tune the bottom end response of any Small Block Series head or combo to suit their playing style
SB500H
The 500 watt SB500H delivers massive tone from a
surprisingly small and compact source. An all metal
chassis, Speakon output, effects loop, defeatable
limiter, XLR Direct output (selectable pre or post)
and a master volume control ensure a full feature
set despite its diminutive size.
❑ 500 watts (4 Ohms)
❑ Ultra Compact and Lightweight Design (4lbs / 1.8kg)
❑ All-Metal Chassis
❑ Versatile 4-band EQ with Additional Low
Frequency Expander
❑ Input Gain and Master Volume Controls
❑ Defeatable Limiter
❑ Passive and Active Inputs
❑ Selectable Pre / Post XLR DI Output
❑ Effects Loop
❑ Made in Canada
Yorkville Sound • 550 Granite Court, Pickering, Ontario Canada L1W 3Y8
Phone (905) 837-8481• Fax (905) 839-5776
Yorkville Sound USA • 4625 Witmer Industrial Estate, Niagara Falls, NY USA 14305
Phone (716) 297-2920 • Fax (716) 297-3689