Floatation garments and life jackets - Aviation and Survival Support

Floatation garments and life jackets

I LIFE JACKETS I LIFE JACKETS I LIFE JACKETS I
MULLION life jackets
MULLION LIFEJACKETS AND
BUOYANCY AIDS
Lifejackets and Buoyancy Aids can be generically classed as Personal
Flotation Devices – PFDs. These can be divided into two main classes:
1) Gas / oral inflatable life jackets which provide face-up in-water
support to the user regardless of physical conditions. These will
generally fall into the 150 Newton and 275 Newton categories.
2) Inherent foam non-inflatable buoyancy aids which require the user
to be competent in swimming and / or positioning themself in the
water to maintain the face-up position. These will generally fall into
the 50 Newton and 100 Newton categories.
PFDs that do not require intervention to activate ( automatically operating PFDs)
are suited to activities where persons are likely to enter the water unexpectedly;
whereas PFDs requiring intervention ( manual inflation only PFDs or buoyancy
aids) are only suitable for use if the user believes there will be sufficient time
to produce full buoyancy, the area of use is always in benign conditions, or help
is always close at hand. In every circumstance the user should ensure that the
operation of the PFD is suited to the specific application.
Certain environmental and ergonomic circumstances - e.g. high waves / heavy
waterproof clothing, immersion suits or flotation suits being worn / tool belts
being carried will undoubtedly influence the relative performance of a PFD. Users
, owners and employers need to ensure that this is taken into account when selecting
the most appropriate PFD. PFDs may also be affected by other conditions
of use such as flame / static or chemical exposure and welding and therefore
specific models are included in our range for these purposes.
Also essential after purchase is the ongoing after –care, maintenance and service
of such PFDs. All SOLAS approved PFDs must legally be serviced annually at a
Mullion approved independent Service Centre and for all CE approved PFDs it
is strongly recommended that they should also be serviced annually at a Mullion
approved Service Centre.
These are all Life Saving Appliances and should be treated with the same respect
and importance you give to your own life!
22

style
CRUISER 150 CE
1MS7A2N06: manual
1MV6A2N06: automatic cellulose cartridge UM
1MS8A2N06: hydrostatic Hammar
red
(BELT)
150N infl atable life jacket ideal for leisure use / Velcro fastening cover / Fixed bladder / Quick
release buckle / Marine grade whistle / SOLAS retroreflective tape / Available in automatic,
hydrostatic or manual infl ation versions / Fitted with crutch strap
EN 396
1993
CRUISER 150 CE
LIFE JACKETS 150N CE
I LIFE JACKETS I LIFE JACKETS I LIFE JACKETS I
23

NEPTUNE 150 CE
style 1MT2A2N06: manual
1MV8A2N06: automatic cellulose cartridge UM
1MT6A2N06: hydrostatic Hammar
red or navy
NEPTUNE 150 CE
style 1MT1A2N06: manual
1MV7A2N06: automatic cellulose cartridge UM
1MT5A2N06: hydrostatic Hammar
red or navy
(HARNESS)
(BELT)
I LIFE JACKETS 150N CE I LIFE JACKETS 150N CE I
150 Newton infl atable life jacket ideal for offshore use with foul weather clothing / Robust zip fastening
cover / Harness or belt option / Crutch strap / Marine grade whistle / SOLAS retroreflective tape
Available in automatic, hydrostatic or manual inflation versions
Also available with velcro closure upon request (ECO 150 CE)
PVC reinforcement - Durable wipe clean PVC reinforced cover for heavy duty / industrial use
150 Newton infl atable life jacket / Robust zip fastening cover / Harness or belt option /
PVC reinforcement / Crutch strap / Marine grade whistle / SOLAS retroreflective tape
Available in automatic, hydrostatic or manual inflation versions
NEPTUNE 150 CE
NEPTUNE 150 CE
EN 396
1993
EN 396
1993
* ALL LIFE JACKET MODELS EXCEPT CRUISER AVAILABLE WITH EN1095 HARNESS AS AN OPTIONAL EXTRA
24

NEPTUNE 150 CE
style 1MT8A2N06: manual
1MY4A2N06: automatic cellulose cartridge UM
1MY6A2N06: hydrostatic Hammar
red with orange PVC reinforcement
NEPTUNE 150 CE
style 1MT7A2N06: manual
1MT9A2N06: automatic cellulose cartridge UM
1MY5A2N06: hydrostatic Hammar
red with orange PVC reinforcement
(HARNESS)
(BELT)
I LIFE JACKETS 150N CE I LIFE JACKETS 150N CE I
Optional extra that can be fi ted to any CE lifejacket model (exept Cruiser)
Gives optimum protection to face and mouth by protecting airways from water ingress and spray
Face window panel incorporates breath holes to prevent asphyxiation
Available in hi vis yellow or hi vis orange.
1MZV
APPROVED AS PER EN 394 / EN 399
25

MARINER 275 CE
style 1MU2A2N06: manual
1MU4A2N06: automatic cellulose cartridge UM
1MU6A2N06: hydrostatic Hammar
red or navy
MARINER 275 CE
style 1MU1A2N06: manual
1MU3A2N06: automatic cellulose cartridge UM
1MU5A2N06: hydrostatic Hammar
red or navy
(HARNESS)
(BELT)
I LIFE JACKETS 275N CE I LIFE JACKETS 275N CE I
26

MARINER 275 CE
style 1MY2A2N06: manual
1MU9A2N06: automatic cellulose cartridge UM
1MU8A2N06: hydrostatic Hammar
red with orange PVC reinforcement
MARINER 275 CE
style 1MY3A2N06: manual
1MY1A2N06: automatic cellulose cartridge UM
1MU7A2N06: hydrostatic Hammar
red with orange PVC reinforcement
(HARNESS)
(BELT)
I LIFE JACKETS 275N CE I LIFE JACKETS 275N CE I
275 Newton infl atable life jacket for use in heavy weather conditions or where heavy loads
such as tools are being carried or heavy clothing is being worn / Zip fastening cover /
Harness or belt option / Crutch strap / Marine grade whistle / SOLAS retroreflective tape /
Available in automatic, hydrostatic or manual inflation versions
MARINER 275 CE
EN 399
1993
PVC reinforcement - Durable wipe clean PVC reinforced cover for heavy duty /
industrial use 275 Newton infl atable life jacket for use in heavy weather conditions or where
heavy loads such as tools are being caried or heavy clothing is being worn / Zip fastening cover /
Harness or belt option / Crutch strap / Marine grade whistle / SOLAS retroreflective tape /
Available in automatic, hydrostatic or manual inflation versions
MARINER 275 CE
* ALL LIFE JACKET MODELS EXCEPT CRUISER AVAILABLE WITH EN1095 HARNESS AS AN OPTIONAL EXTRA
EN 399
1993
27

APPROVED TO NEW 2010
SOLAS REGULATIONS
(According to MSC.200(80) and MSC.207(81)
2MS1
HI-RISE 275N SOLAS LIFEJACKET
style 2MS1A2N06: hydrostatic Hammar
2MS1A3N06: automatic cellulose cartridge UM
red/black or navy black
I LIFE JACKETS 275N SOLAS I LIFE JACKETS 275N SOLAS I
Double chamber infl atable 275N life jacket / Bi-colour cover with Reflective silver
piping in the front / Zip fastening cover / Marine grade stainless steel D-Ring
in front to attach safety line / crutch strap / Marine grade whistle /
Solas retroreflective tape / Automatic water-activated SOLAS light
Also available with integrated sprayhood (2MSA).
2MS1 - HI-RISE
EN 399
1993
28

2MS2
HI-RISE 275N SOLAS LIFE JACKET with PVC reinforcement
style 2MS2A2N06: hydrostatic Hammar
2MS2A3N06: automatic cellulose cartridge UM
red/orange PVC
I LIFE JACKETS 275N SOLAS I LIFE JACKETS 275N SOLAS I
PVC reinforcement - Durable wipe clean PVC reinforced cover for heavy duty - industrial use
Double chamber infl atable 275N life jacket / Zip fastening cover / Marine grade stainless steel
D-Ring in front to attach safety line / Reflective silver piping in the front / crutch strap / Marine
grade whistle / SOLAS retroreflective tape / Automatic water-activated SOLAS light
EN 399
1993
2MS2 - HI-RISE PVC
29

COMPACT LIFE JACKET
APPROVED TO ISO 12402
3MV1
COMPACT LIFEJACKETS
style 3MV1E2N15: hydrostatic Hammar SPI
3MV1E3N15: automatic cellulose cartridge UM DPI
3MV1E5N15: manual UM SPI
red or navy
I LIFE JACKETS 150N I LIFE JACKETS 150N I
Newly developed very compact infl atable lifejacket conform to ISO 12402 - 150N infl atable lifejacket /
High abrasion resistant outercover/ Quick burst zip closure / Infl ation system operational
readiness indicator window on the back / Service date information window on the back / Crutch strap /
Marine grade whistle / SOLAS reflective tape ISO 12402
3MV1
2010
ISO 12402
2006
30

INTEGRATION OF A
FALL ARREST HARNESS
Fall arrest harness fitted with snag proof press stud
and webbing strap system on back of life jacket
3MV3
150N SINGLE INFLATABLE LIFEJACKET
style red / navy / black
ISO 12402
2010
ISO 12402
2006
2MT2
HI-RISE 275N SOLAS
LIFEJACKET WITH HARNESS
style red/black or navy black
EN 399
1993
3
3
3
1995 EN 531
EN 531
1995
1995
EN 531
1995
EN 531
1995
EN 531
1995
3
A B1 C1
A B C D E
A C1
A C2
EN 531
1995
A B2 C1
33 31

INTEGRATON OF PERSONAL
LOCATOR BEACON.
It is possible to integrate a PLB in our life jackets. The PLB is integrated on the inside
of the cover. The advantage to integrate a PLB on the inside of the lifejacket is that the
PLB is protected by the cover and it thereby extends its service life. Each different PLB
is fi xed inside the cover in the best position to optimize its functional effi ciency according
to type of operation.
2MT1
SEA MARSHALL PERSONAL LOCATOR BEACON 275N SOLAS
style red / orange PVC
Special Features for Sea Marshall incorporation / Foam and double fabric padding layer on
lower right inner front of cover for extra protection for S.O.S. Beacon – Will fi t any Sea
Marshall ® AU9 or PLB8 model / Secure elastic housing for S.O.S. Beacon fi tted on right inner
cover. Beacon is viewed through Indicator window and button can also be activated easily
by pressing through the window without having to undo the lifejacket cover / Antenna bulb
window on the shoulders / Service date information window / Antenna guidance loops are
incorporated up the right side of the bladder for securement of the antenna and the top is
secured to the left shoulder ensuring it is retained in the optimum position for beacon signal
effectiveness. BEACON NOT INCLUDED
EN 399
1993
2MT1 - SOS HI-RISE
32

style
2MSC
MOBIL ARM PERSONAL LOCATOR BEACON 275N SOLAS
red / black
Special Features for Mobilarm incorporation / Webbing strap attachment welded to left front
of bladder with reinforced backing / Antenna aperture in upper back cover seam to allow
optimum reception / Antenna guider elastic loops on left back of cover to allow secure and
optimum positioning of antenna BEACON NOT INCLUDED
2MSC - HI-RISE
EN 399
1993
I INTEGRATION OF PERSONAL LOCATOR BEACON I
1MTZ
DIVANSI PERSONAL LOCATOR
BEACON 150N CE
DEVELOPED FOR FISHERMEN
style hi-vis yellow / navy
Special Features for Divansi incorporation / Webbing strap
attachment to left front of bladder / Beacon with automatic
activation when lifejacket is infl ated
BEACON NOT INCLUDED
1MTZ - 150N CE
EN 396
1993
33

1MTL
FIRE RESCUE LIFEJACKET
style 1MTLE3N06706: automatic cellulose
cartridge UM DPI
150N CE
275N CE
Red / Hi-vis yellow / Black
(BELT)
2MSD
HI-RISE 275N SOLAS RESCUE LIFEJACKET
style 2MSDE3N06: automatic cellulose
cartridge UM DPI
red/hi-vis yellow/black
(HARNESS)
(BELT)
1MTL
POLICE RESCUE LIFEJACKET
style 1MTLE3N06016: automatic cellulose
cartridge UM DPI
150N CE
275N CE
Navy / Royal blue / Black
FIRE - POLICE - AMBULANCE
I LIFE JACKETS 150N/275N I LIFE JACKETS 150N/275N I
(BELT)
1MTL
AMBULANCE RESCUE LIFEJACKET
style 1MTLE3LQ1330: automatic cellulose
cartridge UM DPI
150N CE
275N CE
Green / High-vis yellow / Black
34
Single chamber infl atable 150N or 275N lifejacket / Zip fastening cover / Crutch strap / Marine grade
whistle / Solas retroreflective tape on bladder / Chequered special rescue reflective tape on front cover
and back shoulder straps for maximum visibility / 4 slot lash tabs fi tted on front and back for attachment
of additional rescue lights / Padded back neck for comfort / PVC reinforced cover front for durability and
easy cleaning / Infl ation system operational readiness indicator window / Service date window /
Quick release belt buckle.
Available in automatic, hydrostatic or manual versions
EN 399
1993
EN 396
1993
FIRE RESCUE LIFE JACKET /
POLICE / AMBULANCE

style
1MXH
HEAVY DUTY HI VIS LIFEJACKET
150N CE
275N CE
High-vis yellow / Black
1MW1
WORKVEST
style 1MW1A2B01
Hi-vis yellow
1MWQ
FLEXIVEST
style 1MWQA2F01
high vis yellow or
high vis orange
Single chamber 150N or 275N lifejacket / Zip fastening cover / Harness and crutch strap / Marine grade
whistle / Solas retroreflective tape on bladder and on full length of front cover / High vis yellow PVC front
cover / Padded back neck for comfort.
3
Available in automatic, hydrostatic or manual versions.
1995 EN 531
EN 531
1995
1995
A B1 C1
EN 531
1995
A B C D E
EN 531
1995
A C1
EN 531
1995
A C2
1MXH
3
EN 399
1993
EN 396
1993
100 Newton of buoyancy in the form of closed cell foam / Waistcoat style comfortable to wear / SOLAS/IMO
approved reflective tape on shoulders and upper back / High visibility heavy duty PVC fabric that wipes clean
easily / Quick release waist belt / Heavy duty front zip / Chest pocket with marine whistle / Crutch strap for
safety
EN 531
1995
1MW1
EN 393
1993
A B2 C1
50 Newton of inherent buoyancy in the form of closed cell foam divided into compartments for maximum
flexibility in movement (8 front side – 4 back side) / Elasticated side panels for perfect fit / Easy to clean
Flexothane outer fabric in Hi-Vis colour / Chest pocket with marine whistle / Crutch strap for safety /
Solas approved reflective tape on shoulders and upper back
1MWQ
EN 393
1993
35

FR WELDERS LIFE JACKET
275 NEWTON CE
style
1MYG
FR WELDERS LIFEJACKET
1MYGA5VP1: manual
1MYGA3VP1: automatic cellulose
cartridge UM
1MYGA2VP1: hydrostatic Hammar
silver
Optional:
Welders lifejacket with an
extra blue FR cover for
anti-glare and anti-reflection.
275 Newton CE inflatable life jackets / Touch and close fastening cover / Protects against fl ame and molten
metal splashes / Light weight and comfortable to wear / Wipe clean cover
Material tested to:
-EN348, as per EN470/1 for impact against molten metal drops during welding
-EN367, as per EN531 level B1 for protection against convective heat
EN 531
-EN366, as per EN531 level C3 for protection against radiant heat
1995
-EN373, as per EN531 level D2 for protection against molten aluminium
-EN373, as per EN531 level E3 for protetcion against molten iron splash
ALSO vailable in 150N CE (1MYD)
1995 EN 531
1995
A B1 C1
EN 531
1995
A B C D E
EN 531
1995
A C1
EN 531
1995
A C2
3
EN 533
Siopor: Index1,12x40°C
3
Lining: Index3,5x40°C
1997
1MYG / 1MYD
EN 533
Siopor: Index1,12x40°C
Doublure: Index3,5x40°C
1997
EN 533
Siopor: Index1,12x40°C
Index3
Lining: Index3,12x40°C
1997
1997
EN 533
Siopor: Index1,12x40°C
Doublure: Index3,12x40°C
1997
EN 533
EN Siopor: 399Index1,12x40°C
Lining: 1993 Index3,12x75°C
1997
EN 533
Siopor: Index1,12x40°C
Doublure: Index3,12x75°C
1997
EN 531
1995
A B2 C1
36
EN 533
Siopor: Index1,12x40°C
Voering: Index3,5x40°C
1997
EN 533
Siopor: Index1,12x40°C
Voering: Index3,12x40°C
1997
EN 533
Siopor: Index1,12x40°C
Voering: Index3,12x75°C
1997

The FR welders life jacket is designed to
give protection against flames and molten
metal splaches.
37

SPARE PARTS life jackets
LIN03MARA
UNITED MOULDERS
AUTO INFLATION SYSTEM
LIN03CARA
UNITED MOULDERS
AUTO INFLATION SYSTEM
CARTRIDGE FOR LIN03MARA
LIN03PARA
UNITED MOULDERS CLIP
FOR LIN03MARA (NEW)
LIN03P0RA
UNITED MOULDERS CLIP
FOR LIN03MARA (OLD)
LIN07M0RA
UNITED MOULDERS
DUAL POINT
INDICATOR SYSTEM
LIN07C0RA
UNITED MOULDERS DUAL
POINT INDICATOR SYSTEM
CARTRIDGE FOR LIN07M0RA
LIN04M0RA
HALKEY ROBERTS
ALPHA INFLATOR
(INCLUDES LIN04SBRA
& LIN04PARA)
LIN04SBRA
HALKEY ROBERTS
AUTO SUPER BOBBIN
FOR LIN04MORA
LIN04PARA
HALKEY ROBERTS CLIP
FOR LIN04M0RA (NEW)
LIN04P0RA
HALKEY ROBERTS CLIP
FOR LIN04 M0RA (OLD)
LIN01F000
HAMMAR AUTO FRONT
LIN02F000
HAMMAR MANUEL FRONT
LIN01B000
HAMMAR BACK FOR
LIN01F000 + LIN02F000
38

SPARE PARTS life jackets
LCY033000
33GM CYLINDER
LCY060000
60GM CYLINDER
1MZWA2YN3
NEOPRENE HOOD
LIN04F000
1MA1 HAMMAR AUTO SINGLE
POINT INDICATOR SYSTEM
LIN04B330
1MA1 HAMMAR BACK +
33GR CYLINDER
FOR LIN04F000
LIN04B600
1MA1 HAMMAR BACK +
60GR CYLINDER
FOR LIN04F000
LLI00000U
SOLAS S.O.S. LIGHT
WHISTLE
LWH030C10
1MZ9A2GWL
CRUTCH STRAP
FOR LIFEJACKET
SOLAS REFLECTORS
SELF-ADHESIVE
LENGTH : 12CM IRFQ50M0R
LENGTH : 22CM IRFP50M0R
1MZ1A2VP1 (CE) STD SIZE
FR WELDERS COVEr
39

TECHNICAL INTRODUCTION TO
MARITIME SAFETY CLOTHING
DIFFERENT TYPES OF PROTECTION CAN BE OPTIONALLY COMBINED:
• INHERENT BUOYANCY or INFLATABLE BUOYANCY
• THERMAL PROTECTION AGAINST HYPOTHERMIA
• FOUL WEATHER PROTECTION
• HIGH VISIBILITY
• FLAME RETARDANT, CHEMICAL RESISTANT AND ANTISTATIC PROPERTIES
SOME DEFINITIONS AND COMMENTS:
(for a better understanding of the MULLION product descriptions)
INHERENT BUOYANCY MATERIAL:
Buoyancy provided by a material which is less dense than water, e.g. a closed cell foam, and forming a
permanent part of the garment.
PERSONAL BUOYANCY AID:
Garment or device which when correctly worn and used in water, will provide a specifi c amount of
buoyancy… to assist the wearer to float without special efforts in a vertical or upward position,
the airways clear of the water.
INFLATABLE LIFE JACKET:
Personal buoyancy aid from which the buoyancy is obtained by infl ating it by mouth (orally infl ated) or
from a compressed CO2 gas cylinder; either manually by pulling a handle = operated by the wearer, or
automatically = without the wearer carrying out any action, but as a result of immersion in water, either
by a hydrostatic mechanism or a cellulose cartridge type of mechanism. Mullion 150N and 275N infl atable
life jackets are made of a single-chamber bladder (EN standards) or double-chamber bladder (IMO/SOLAS
regulations). A ‘stand alone’ automatic life jacket will self-right the wearer if correctly donned; it will turn
over a person falling into the water face down, even if he/she is unconscious, it will NOT, however protect
against cold shock or hypothermia.These are mainly worn on their own in warmer climates where there is
less risk of cold water immersion and shock.
They can also be worn in conjunction with a constant wear suit, the latter being the ideal combination to
give the wearer all round protection.Where the two are worn together, it is important to follow the
donning instructions strictly and check and test their compatibility.
as one can counteract the other and have a negative effect on the self-righting properties. For example a
150 Newton life jacket worn with a constant wear floatation suit is not recommended for self-righting
purposes; for this application we advise the use of a compatible 275 Newton life jacket.
DOUBLE-CHAMBER BUOYANCY SYSTEMS:
Buoyancy provided by 2 separate infl atable compartments, such that if mechanical damage occurs to one,
the other can still operate and provide suffi cient buoyancy on its own (required for SOLAS application).
HYPOTHERMIA:
A condition where the body core temperature is below 35°C, 2°C lower than the ‘normal’ core body
temperature (=37°C). The state of hypothermia is of a higher risk to a person immersed in cold water
than in a cold air environment, due to the fact that water is a greater conductor of heat than air.
Consequently the body cools much more rapidly in water than in still air of the same temperature
(approximately 25 times faster).
40

MARITIME PPE PRODUCT
STANDARDS
EN393: 50N BUOYANCY AIDS
Have a buoyancy of no less than 50 Newton for the average adult. They are intended for use in
sheltered waters where more bulky or buoyant devices would impair the user’s activity or actually
endanger the user, and when help is close at hand and the user is a conscious, competent swimmer.
EN 395: 100N LIFE JACKETS
Have buoyancy of no less than 100 Newton for the average adult. They are intended for use
offshore or when foul weather clothing is used.
EN 396
1993
EN 399
1993
EN 396: 150N LIFE JACKETS
3
Have buoyancy of no less than 150 Newton for the average adult and are intended for use
offshore, or when foul weather clothing is used.
EN 399: 275N LIFE JACKETS
3
Have buoyancy of no less than 275 Newton for the average adult and are intended for use
offshore in extreme conditions, when heavy protective clothing is used, or loads such as tool
belts are being carried.
3
3
Recognition that the equipment fully complies with the requirements of the MED
(Marine Equipment Directive) will be denoted by a ‘Ships Steering Wheel’ which must be
on all equipment sold to European Community Ships of 500 tons or more in size.
In addition,material testing and mechanical tests are done, requirements on colour & retro
reflective material, the presence of specified trimmings is checked: a whistle, light,… and further
performance tests on the whole garment or device e.g. the capabilities of donning, floatation,
righting, etc. The head should be supported at the side and at the back so the airways are well
out of the water (the mouth should be 12 cm higher than the water surface). The torso should be
leaning backwards at an angle between 30° and 90°(vs. vertical) A ‘relaxed’ (unconscious) person
face down in the water should be automatically turned on to his back within10 seconds
(EN395) and within 5 seconds (EN396, EN399).
EN 1095: DECK HARNESSES/SAFETY LINES
This European Standard is applicable to harnesses and safety lines in the following sizes of body
weight. Size1: over 50kg , Size 2: between 20kg and 50kg , Size 3: lower than 20kg; which are
intended to be worn by all persons when in the exposed cockpit or on the working deck of a
recreational vessel afloat. It is not applicable to dinghy “trapeze” harnesses, windsurfi ng harnesses,
or seat harnesses for fast motor boats.
41

MORE DEFINITIONS
CLO value:
A unit to express the relative thermal insulation value. One CLO = 0.1555 °C x m 2 / W
Dry suit:
A garment that stops the entry of signifi cant quantities of water upon immersion, the insulation
depends on the wearer staying dry.
Wet suit:
A garment that allows the controlled entry and exit of water when the wearer is immersed.
By keeping a stationary layer of water, this will work as an insulation layer.
Immersion suit:
A suit intended to protect the wearer from the effects of immersion in cold water.
Constant wear suit:
A floatation suit, designed to be routinely worn in anticipation of accidental immersion
in cold water, but permitting physical activity by the wearer. The suit can also be worn
as an ‘every day’ working garment for foul weather protection (rain, cold, wind).
Abandonment suit:
An immersion suit, designed to permit rapid donning in the event of an imminent immersion.
OTHER EUROPEAN PPE NORMS
x
y
EN 343
2003
pr A1- 2005
EN 471
2005
pr A1- 2005
X
Y
2
3
3
3
EN 343
Protective clothing against rain, wind
2
1
2
3
and EN cold 343 at temperatures EN 343
EN EN higher 343 531 than
2003
2003
2003 1995
1995
-5°C.
pr A1- 2005
pr A1- 2005
pr A1- 2005
EN 343
2003
pr A1- 2005
Performance parameters:
x: waterproofness (3 levels)
y: breathing properties (3 levels)
EN 471
High-visibility Y
2 clothing
EN 471
2003
pr A1- 2005
X
EN 471
3
1995 EN 531
EN 531
1995
A B1 C1 A B C D E
EN 471
x: surface 2003 of fluorescent 2003and retroreflective 2003
pr A1- 2005
pr A1- 2005
A1-2007
material (3 levels)
y: quality of the retroreflective material
(2 levels)
1
2
EN 471
1
2
prEN 1149-5
2005
EN 465
1995
EN 531
1995
A C1
EN 465
1995
EN 531
Protective clothing for workers exposed to
heat
EN 531
1995
EN 531
1995
A: min. requirements, fabric combination conforms to EN
A C2
A B2
533 index 3 + min.
C1
EN 1149
Protection against the danger caused by static
electricity
2
EN 465
2
Protection against liquid chemicals, spraytight
(type 4)
1997 EN 533
EN 533
1997
1997
x
y
x
EN 533
Index 1
1997
EN 533
Protection EN 533 against EN 533 flames EN 533
Index 3
1997
Index 1, 12x40°C
x: 1997 flame spreading index (3 1997levels).
y: durability index
EN 533
Index 3, 5x60°C
1997
EN 533
Index 3, 12x40°C
1997
EN 533
Index 3, 12x75°C
1997
EN 469
Protective clothing against fire
EN 533
Index 3, 5x95°C
1997
Xf2 the performance in the heat test : flame
Xr2 the performance in the heat test : radiation
Y2 the performance in the waterproofness tests
Z2 the resistance against water vapour
1997 EN 533
EN 533
1997
1997
y
EN 533
Index 1
1997
EN 533
Index 3
1997
EN 533
1997
EN 533
Index 1, 12x40°C
1997
EN 533
Index 3, 5x60°C
1997
EN 533
Index 3, 12x40°C
1997
EN 533
Index 3, 12x75°C
1997
EC Council EN 533 Directive 89/686/EC: Basic Health
Index 3, 5x95°C
1997
and Safety Requirements
x
y
1997 EN 533
EN 533
EN 533
EN 533
EN 533
EN 533
EN 533
EN 533
EN 533
EN 533
1997 Copyright 1997 SIOEN Index INDUSTRIES 1
Index 3 04.2011. 1997 All rights Index 1, 12x40°C reserved. Index 3, Real 5x60°C textile Index 3, 12x40°C colours Index may 3, 12x75°C slightly Index 3, differ 5x95°C from the printed ones.
1997
1997
1997
1997
1997
1997
1997
42
As a consequence of the ISO 9001 quality policy, Sioen constantly searches to improve every detail. Thus model changes are possible.
We are not responsible for printing errors.
x
1997 EN 533
EN 533
1997
1997
y
EN 533
Index 1
1997
EN 533
Index 3
1997
EN 533
1997
EN 533
Index 1, 12x40°C
1997
EN 533
Index 3, 5x60°C
1997
EN 533
Index 3, 12x40°C
1997
EN 533
Index 3, 12x75°C
1997
EN 533
Index 3, 5x95°C
1997

THERMAL PROTECTION CATEGORIES
Immersed CLO
Water temperature
15°C
0,75 0,50 0,33 0,20
Estimated protection time
6,0h 2,5h 1,5h 1,0h
9,0h 4,5h 2,5h 1,5h
15,0h 7,0h 4,0h 2,0h
24,0h 15,0h 6,0h 3,0h
MULLION IS A PART OF THE SIOEN INDUSTRIES GROUP, QUOTED ON THE BELGIAN STOCK
EXCHANGE AND SPECIALISING IN TECHNICAL TEXTILES, TECHNICAL PROTECTIVE CLOTHING
AND FINE CHEMICALS.
43