Dolomite Fax - Dolomite Microfluidics

The Dolomite Centre Ltd
Using the Mitos Sensor Units with the Mitos P-Pump range
The Mitos Sensor Display and Mitos Flow Rate Sensors are compatible with the Mitos
P-Pump (Part No. 3200016), Mitos P-Pump Remote (Part No. 3200176) and Mitos
P-Pump with 3-way Accessories (Part No. 3200094) for measuring and displaying flow
rates.
The Mitos Flow Rate Sensor simply attaches to the Mitos Sensor Display with a push-click
action. Once connected to a Mitos Flow Rate Sensor, the display can be used as a
standalone device (picture left) or sit on top of the Mitos P-Pump (picture top left).
By connecting the USB lead of the Mitos Sensor Display to the Mitos P-Pump, the display
is powered and the Mitos P-Pump records the flow rates which will be stored in a log file
within the pump together with the pressure control data.
In a similar way the Mitos Sensor Interface can also be connected to the Mitos P-Pump
range to allow “displayless” flow rate data-logging via the Mitos P-Pump software.
Mitos Sensor Unit connected to the Mitos
P-Pump as a standalone device
Mitos Sensor Unit attached to the Mitos
P-Pump
Future enhancements
The Flow Rate Sensors will be able to communicate with the Mitos P-Pump and provide
closed loop control of flow rate using the Mitos P-Pump interface.
Mitos Sensor Units_product datasheet Page 6 of 7