DH6/10

Pressure gauge valve
Pressure gauge valve
Specifications
DG6
Maximum working pressure 30.9 MPa (315 kgf/cm 2 )
Allowable tank pressure 0.05 MPa (5 kgf/cm 2 )
Hydraulic symbols
Overview
This pressure gauge valve is a kind of a
three-way manual selector lever by manual
operation and is used to check the pressure.
Features
1. The casing is structured to be conveniently
installed on the panel.
2. The pressure gauge can be joined to the
valve main body by threaded port or can be
connected to it by a pipe.
3. Pressure can be detected with one touch.
4. The pressure gauge has a longer service
life because only tank pressure is applied
unless it is used.
Type indication
Pressure gauge valve
Nominal dimension
Connection method
G = G thread connection type
R = R thread connection type
PG = G thread connection type
(Port P, T = Gasket connection, Port M = G thread connection)
PR = R thread connection type
(Port P, T = Gasket connection, Port M = R thread connection)
Series number: 10
Type of hydraulic oil
No symbol Mineral based hydraulic oil
V Phosphate ester based hydraulic oil
W Fatty ester based hydraulic oil
Water-glycol based hydraulic oil
Pressure gauge connector
No symbol=
Types without pressure gauge connector
G14 = Types with G1/4 pressure gauge connector
G38 = Types with G3/8 pressure gauge connector
G12 = Types with G1/2 pressure gauge connector
Position holding method
2 = Spring offset type
Accessories
Mounting bolt
Type Hexagon socket head cap thread Quantity Tightening torque Nm (kgfcm)
4 pcs.
1-80