DH6/10
DH6/10 DH6/10
Type indication C series Controller for solenoid proportional control valve - C series LVDTDifferential transformerM) F = LVDT No symbol = Types without LVDT Type of the solenoid W = double solenoid No symbol = single solenoid Series number: 20 (Except, only C-B10-A100, 200 are 21) to Maximum output current B: BOX type KC series Controller Controller for solenoid proportional control valve - KC series KC = For single solenoid KWC = For double solenoid Series number: 11 Maximum output current = 1.2A B: BOX type E: PC board type 6-33
For AC power supply single solenoid C-B10-A C series Performance Constant current characteristic Linearity Step response Supply voltage fluctuation Change of load resistance Change of ambient temperature 2% FS or below 0 ms0100 1% FS or below (±10%) 1.5% FS or below (33 to 45) 1% FS or below (0 to 50) For AC power supply single solenoid Precautions in use This controller has internal heat generation. Do not install in a closed place. In addition, when more than one set are installed, keep the distance of 20 mm or more. Use a shielded cable for input signal wiring to protect it from noise. Connection method Please refer to the operation manual. (Note) Step response is measured while the solenoid is connected. FS (Full Scale) means the rating of 750 mA. Specifications Type AC power supply (50/60 Hz) Power consumption Solenoid coil resistance Maximum output current Input impedance Voltage input Input command Resistance input Input gain adjustment Frequency Dither adjustment Amplitude 40 VA or lower 45 or lower DC0 to 10V max. Variable resistance5 k (0.5 W or higher) Bias adjustement Ambient temperatureand humidity 0 to 50, 90% RH or lower (No condensation) Vibration proof Conforming to JIS C0911 IIB, Class-3 Frequency 16.7 Hz, amplitude 3 mm P-P Mass Dimension drawing 6-34
- Page 236 and 237: Logic valve LU 25 A 32DB Hydr
- Page 238 and 239: Logic valve LU40S Hydraulic symbo
- Page 240 and 241: Logic valve LU40E A B
- Page 242 and 243: Logic valve LU 50 63B O-ring “V
- Page 244 and 245: Logic valve 50 ●LU E 63 A L D E G
- Page 246 and 247: Logic valve LU80B Counterboring d
- Page 248 and 249: Logic valve LU 80 100 E A B
- Page 250 and 251: Selector valve Dimension drawing CS
- Page 252 and 253: Logic element for pressure control
- Page 254 and 255: Solenoid proportional control valve
- Page 256 and 257: ■Specifications Nominal dimension
- Page 258 and 259: Solenoid proportional balanced pist
- Page 260 and 261: Pressure override characteristics (
- Page 262 and 263: ●RBP35P-10/*-E B C P 165 130 X T
- Page 264 and 265: Current - Pressure characteristics
- Page 266 and 267: Solenoid proportional pilot pressur
- Page 268 and 269: ■Dimension drawing ●PRDP1M6-D 4
- Page 270 and 271: Specifications Nominal dimension
- Page 272 and 273: ■Dimension drawing 10 ●PRBP 20
- Page 274 and 275: ■Current - Flow rate characterist
- Page 276 and 277: Specifications Maximum working pres
- Page 278 and 279: ●DHP22 (Single solenoid type) 94.
- Page 280 and 281: Specifications Nominal dimension 6
- Page 282 and 283: Solenoid proportional control valve
- Page 284 and 285: ■Dimension drawing ●DHPL16 18.3
- Page 288 and 289: For AC power supply double solenoid
- Page 290 and 291: For DC power supply double solenoid
- Page 292 and 293: For DC power supply double solenoid
- Page 294 and 295: Sub-plate Appendix-1
- Page 296 and 297: ●Pressure control valve ●Flow c
- Page 298 and 299: ●P-RB10 Counterboring diameter φ
- Page 300 and 301: ●P-CHY20 Screw diameter J, screw
- Page 302 and 303: ●P-DE10 115 11.5 92 32 46 23 75 2
- Page 304 and 305: P-DEH16 Counterborin
- Page 306 and 307: ●P-PU20 Counterboring diameterφC
- Page 308 and 309: FlangeNipple Appendix-15
- Page 310 and 311: ●STNL-High pressure 30.9 MPa (315
- Page 312 and 313: Application examples of SUN cartrid
- Page 314: Kawasaki Heavy Industries, Ltd. Ove
For AC power supply single solenoid<br />
C-B<strong>10</strong>-A<br />
C series<br />
Performance<br />
Constant current<br />
characteristic<br />
Linearity<br />
Step response<br />
Supply voltage<br />
fluctuation<br />
Change of load<br />
resistance<br />
Change of ambient<br />
temperature<br />
2% FS or below<br />
0 ms0<strong>10</strong>0<br />
1% FS or below (±<strong>10</strong>%)<br />
1.5% FS or below (33 to 45)<br />
1% FS or below (0 to 50)<br />
For AC power supply single solenoid<br />
Precautions in use<br />
This controller has internal heat<br />
generation. Do not install in a closed place.<br />
In addition, when more than one set are<br />
installed, keep the distance of 20 mm or<br />
more.<br />
Use a shielded cable for input signal wiring<br />
to protect it from noise.<br />
Connection method<br />
Please refer to the operation manual.<br />
(Note) Step response is measured while the solenoid is connected.<br />
FS (Full Scale) means the rating of 750 mA.<br />
Specifications<br />
Type<br />
AC power supply (50/60 Hz)<br />
Power consumption<br />
Solenoid coil resistance<br />
Maximum output current<br />
Input impedance<br />
Voltage input<br />
Input command<br />
Resistance input<br />
Input gain adjustment<br />
Frequency<br />
Dither adjustment<br />
Amplitude<br />
<br />
<br />
40 VA or lower<br />
45 or lower<br />
<br />
<br />
DC0 to <strong>10</strong>V max.<br />
Variable resistance5 k (0.5 W or higher)<br />
<br />
<br />
<br />
<br />
<br />
Bias adjustement<br />
<br />
Ambient temperatureand humidity<br />
0 to 50, 90% RH or lower (No condensation)<br />
Vibration proof<br />
Conforming to JIS C0911 IIB, Class-3<br />
Frequency 16.7 Hz, amplitude 3 mm P-P<br />
Mass<br />
<br />
Dimension drawing<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
6-34
Change language