DH6/10

Specifications
Nominal dimension
Maximum working
pressure MPa (kgf/cm 2 )
Maximum flow rate L/min
Reproducibility %
Ports A, B
Port Y
1.0 (10) External drain, tank
2 or less
Electrical specifications
Hysteresis %
Sub-plate
Valve type Sub-plate type Connection diameter Mass
Solenoid rated current mA
Coil resistance
Dither (Recommendable value)
In case the amplifier is installed separately Standard amplifier type
Power source
In case of amplifier mounted type
Command voltage
Mass kg
5 or less
See the Current - Pressure Characterisitics
(the following figure).
Accessories
Mounting bolt
Type
Hexagon socket
head cap thread Quantity Tightening torque N・m (kgf・cm)
Pressure reducing valve of solenoid proportional
balanced piston type
When you use a sub-plate, please place an order for the above sub-plate type.
For the dimension drawing, refer to page 6, and 7 of the appendix.
Current - Pressure characteristics (viscosity 25 mm 2 /s (cSt))
PRBP
Pressure (MPa)
35
30
25
20
15
10
5
0
100
200
300 400 500 600
Current (mA)
For 34.3 MPa
For 30.9 MPa
For 24.5 MPa
700 800 850 930
Pressure (MPa)
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
100
200
For 14.7 MPa
For 9.8 MPa
For 4.9 MPa
300 400 500550600
700 800
Current (mA)
6-17