DH6/10
DH6/10 DH6/10
●RBP35P-10/*-E B C P 165 130 X T Y 35 70 20 115 37.5 140 195 PG11 (Cable outer diameter 8 to 10 mm) G 1 4 Screw depth 14 (With plastic plug) 21.5 246 146 52 100 21 X φ5.2 φ18 285 In case of electric connection symbol C (DIN large connector GDME3011) P Y φ40 φ55 T φ34 73 69 Max. 17.5 (Use length of 16.5 to 17.5 mm) (It will drop out if excessively be moved backward) Emergency manual adjustment screw Maximum pressure limiting device φ40 φ55 6-M16 Tightening torque 235.2±35.2 N・m (2400±360 kgf・cm) 37 Solenoid air bleeding plug In case of electric connection symbol B (DIN connector GDM3011) 242 Solenoid proportional balanced piston type relief valve ●RBP35P-10/*-EE P 165 130 X T Y 35 70 20 115 37.5 140 195 G 1 4 Screw depth 14 (With plastic plug) 285 241 52 21 Y φ34 Max. 17.5 (Use length of 17.5 mm or less) (It will drop out if excessively be moved backward) 146 100 Solenoid Air bleeding plug Maximum pressure limiting device 21.5 X P T φ5.2 φ18 φ40 φ55 φ40 φ55 6-M16 Tightening torque 235.2±35.2 N・m (2400±360 kgf・cm) 6-9
Solenoid proportional pilot pressure reducing valve – Direct operated type PRDP6 ●Hydraulic symbols P T A T A P Solenoid proportional pilot pressure reducing valve – Direct operated type ■Overview It consists of the DC proportional solenoid and spool type direct operated pressure reducing valve, and the position of the directional flow regulating valve and allows tilting angle of the variable capacity pump to be remotely controlled at a rate in proportion to the input current. ■Type indication ■Features 1. Exclusively for single solenoid type, small size, and inexpensive. 2. Special damping mechanism with a spring realises superior stability. 3. During the initial adjustment or malfunction in the electrical system, manual operation can be done with the push rod. Solenoid proportional type Direct operated type pilot pressure reducing valve Nominal dimension 6 Type of hydraulic oil No symbol V W = = = Mineral based hydraulic oil Phosphate ester based hydraulic oil Fatty ester based hydraulic oil Water-glycol based hydraulic oil Connection method P = Gasket connection type R = Rc thread connection type G = G thread connection type Electric connection symbol B = DIN connector C = DIN large connector L = Lead wire (with sure plug) Series number: 10 Maximum adjustment pressure 30 = 2.9MPa(30kgf/cm 2 ) 50 = 4.9MPa(50kgf/cm 2 ) ■Specifications Maximum working pressure MPa (kgf/cm 2 ) Electrical specifications Nominal dimension PRDP6*-10/30 PRDP6*-10/50 Port P, A Port T Secondary control pressure MPa (kgf/cm 2 ) Reproducibility % Hysteresis % Mass kg Rated current mA Coil resistance Ω Dither (Recommendable value) Standard amplifier type 0 to 2.9 (0 to 30) 13.7(140) 1.0(10) 0 to 4.9 (0 to 50) 2 or less 5 or less 700/1,400 24/6 at 20℃ 60Hz, 150/300mAP-P 100 C-B10-A 200 /C-B15-D24 2.5 ■Sub-plate ■ Accessories ●Mounting bolt Solenoid ratings C D = 24Ω×0.75A = 6Ω×1.5A Valve type Sub-plate type Connection diameter Mass PRDP6 P-DE6R14-0 P-DE6G14-0 P-DE6R38-0 P-DE6G38-0 Rc 1 4 1.0kg 1.3kg Type Hexagon socket head cap thread Quantity Tightening torque N・m (kgf・cm) PRDP6 M5×50L 4 pcs. 6.9±1.0(70±10.5) G 1 4 Rc 3 8 G 3 8 When you use a sub-plate, please place an order for the above sub-plate type. For the dimension drawing, refer to page 11 of the appendix. 6-10
- Page 212 and 213: Dimension drawing S-2TC6 Maximum 21
- Page 214 and 215: ●S-(2)TC22 5.6 29.2 100.6 94.3 76
- Page 216 and 217: ■Dimension drawing ●S-4C5 60 48
- Page 218 and 219: Check valve block ZA Hydraulic
- Page 220 and 221: ●ZA30 5 208.5 116 2 82.5 51.3 50.
- Page 222 and 223: Dimension drawing ZNS5-1 4-5.5 thro
- Page 224 and 225: ZNS10-1 4-6.6 through hole
- Page 226 and 227: Logic valve Logic valve KLD/LU A po
- Page 228 and 229: Logic valve Cover type symbols Nomi
- Page 230 and 231: Logic valve Pressure decreasing cha
- Page 232 and 233: Logic valve KLD - manifold Machinin
- Page 234 and 235: Logic valve 16 LU 25B
- Page 236 and 237: Logic valve LU 25 A 32DB Hydr
- Page 238 and 239: Logic valve LU40S Hydraulic symbo
- Page 240 and 241: Logic valve LU40E A B
- Page 242 and 243: Logic valve LU 50 63B O-ring “V
- Page 244 and 245: Logic valve 50 ●LU E 63 A L D E G
- Page 246 and 247: Logic valve LU80B Counterboring d
- Page 248 and 249: Logic valve LU 80 100 E A B
- Page 250 and 251: Selector valve Dimension drawing CS
- Page 252 and 253: Logic element for pressure control
- Page 254 and 255: Solenoid proportional control valve
- Page 256 and 257: ■Specifications Nominal dimension
- Page 258 and 259: Solenoid proportional balanced pist
- Page 260 and 261: Pressure override characteristics (
- Page 264 and 265: Current - Pressure characteristics
- Page 266 and 267: Solenoid proportional pilot pressur
- Page 268 and 269: ■Dimension drawing ●PRDP1M6-D 4
- Page 270 and 271: Specifications Nominal dimension
- Page 272 and 273: ■Dimension drawing 10 ●PRBP 20
- Page 274 and 275: ■Current - Flow rate characterist
- Page 276 and 277: Specifications Maximum working pres
- Page 278 and 279: ●DHP22 (Single solenoid type) 94.
- Page 280 and 281: Specifications Nominal dimension 6
- Page 282 and 283: Solenoid proportional control valve
- Page 284 and 285: ■Dimension drawing ●DHPL16 18.3
- Page 286 and 287: Type indication C series Controller
- Page 288 and 289: For AC power supply double solenoid
- Page 290 and 291: For DC power supply double solenoid
- Page 292 and 293: For DC power supply double solenoid
- Page 294 and 295: Sub-plate Appendix-1
- Page 296 and 297: ●Pressure control valve ●Flow c
- Page 298 and 299: ●P-RB10 Counterboring diameter φ
- Page 300 and 301: ●P-CHY20 Screw diameter J, screw
- Page 302 and 303: ●P-DE10 115 11.5 92 32 46 23 75 2
- Page 304 and 305: P-DEH16 Counterborin
- Page 306 and 307: ●P-PU20 Counterboring diameterφC
- Page 308 and 309: FlangeNipple Appendix-15
- Page 310 and 311: ●STNL-High pressure 30.9 MPa (315
Solenoid proportional pilot pressure reducing valve – Direct operated type PRDP6<br />
●Hydraulic symbols<br />
P<br />
T<br />
A<br />
T<br />
A<br />
P<br />
Solenoid proportional pilot pressure reducing valve – Direct operated type<br />
■Overview<br />
It consists of the DC proportional solenoid<br />
and spool type direct operated pressure<br />
reducing valve, and the position of the<br />
directional flow regulating valve and allows<br />
tilting angle of the variable capacity pump<br />
to be remotely controlled at a rate in<br />
proportion to the input current.<br />
■Type indication<br />
■Features<br />
1. Exclusively for single solenoid type,<br />
small size, and inexpensive.<br />
2. Special damping mechanism with a spring<br />
realises superior stability.<br />
3. During the initial adjustment or<br />
malfunction in the electrical system,<br />
manual operation can be done with the<br />
push rod.<br />
Solenoid proportional type<br />
Direct operated type pilot pressure reducing valve<br />
Nominal dimension<br />
6<br />
Type of hydraulic oil<br />
No symbol<br />
V<br />
W<br />
=<br />
=<br />
=<br />
Mineral based hydraulic oil<br />
Phosphate ester based hydraulic oil<br />
Fatty ester based hydraulic oil<br />
Water-glycol based hydraulic oil<br />
Connection method<br />
P = Gasket connection type<br />
R = Rc thread connection type<br />
G = G thread connection type<br />
Electric connection symbol<br />
B = DIN connector<br />
C = DIN large connector<br />
L = Lead wire (with sure plug)<br />
Series number: <strong>10</strong><br />
Maximum adjustment pressure<br />
30 = 2.9MPa(30kgf/cm 2 )<br />
50 = 4.9MPa(50kgf/cm 2 )<br />
■Specifications<br />
Maximum working<br />
pressure<br />
MPa (kgf/cm 2 )<br />
Electrical<br />
specifications<br />
Nominal dimension PRDP6*-<strong>10</strong>/30 PRDP6*-<strong>10</strong>/50<br />
Port P, A<br />
Port T<br />
Secondary control pressure MPa (kgf/cm 2 )<br />
Reproducibility %<br />
Hysteresis %<br />
Mass kg<br />
Rated current mA<br />
Coil resistance Ω<br />
Dither<br />
(Recommendable value)<br />
Standard amplifier type<br />
0 to 2.9<br />
(0 to 30)<br />
13.7(140)<br />
1.0(<strong>10</strong>)<br />
0 to 4.9<br />
(0 to 50)<br />
2 or less<br />
5 or less<br />
700/1,400<br />
24/6 at 20℃<br />
60Hz, 150/300mAP-P<br />
<strong>10</strong>0<br />
C-B<strong>10</strong>-A 200 /C-B15-D24<br />
2.5<br />
■Sub-plate<br />
■ Accessories<br />
●Mounting bolt<br />
Solenoid ratings<br />
C<br />
D<br />
= 24Ω×0.75A<br />
= 6Ω×1.5A<br />
Valve type Sub-plate type Connection diameter Mass<br />
PRDP6<br />
P-DE6R14-0<br />
P-DE6G14-0<br />
P-DE6R38-0<br />
P-DE6G38-0<br />
Rc 1 4<br />
1.0kg<br />
1.3kg<br />
Type Hexagon socket head cap thread Quantity Tightening torque N・m (kgf・cm)<br />
PRDP6 M5×50L<br />
4 pcs. 6.9±1.0(70±<strong>10</strong>.5)<br />
G 1 4<br />
Rc 3 8<br />
G 3 8<br />
When you use a sub-plate, please place an order for the above<br />
sub-plate type.<br />
For the dimension drawing, refer to page 11 of the appendix.<br />
6-<strong>10</strong>