DH6/10

DH6/10 DH6/10

07.11.2014 Views

Pressure override characteristics (viscosity 25 mm 2 /s (cSt)) RBP10 RBP20 Pressure (MPa) 35 30 25 20 15 10 5 For 34.3 MPa For 30.9 MPa For 24.5 MPa For 14.7 MPa For 9.8 MPa For 4.9 MPa Pressure (MPa) 35 30 25 20 15 10 5 For 30.9 MPa, 34.3 MPa For 24.5 MPa For 14.7 MPa For 9.8 MPa For 4.9 MPa 0 25 50 75 Flow rate (L/min) 100 0 50 100 150 200 250 300 Flow rate (L/min) RBP30 RBP35 Pressure (MPa) 35 30 25 20 15 10 5 0 For 30.9 MPa, 34.3 MPa For 24.5 MPa For 14.7 MPa For 9.8 MPa For 4.9 MPa 35 For 30.9 MPa, 34.3 MPa 30 For 24.5 MPa 25 20 For 14.7 MPa 15 For 9.8 MPa 10 For 4.9 MPa 5 50 100 150 200 250 300 350 400 450 500 0 100 200 300 400 500 600 700 Flow rate (L/min) Flow rate (L/min) Minimum adjustment pressure characterisitcs (viscosity 25 mm 2 /s (cSt)) Input current: 0 Pressure (MPa) Solenoid proportional balanced piston type relief valve RBP10 RBP20 Pressure (MPa) 0.8 0.8 0.7 0.6 0.6 For 24.5 MPa, 30.9 MPa, and 34.3 MPa 0.5 For 24.5 MPa, 30.9 MPa, and 34.3 MPa For 14.7 MPa 0.4 0.4 0.3 0.2 For 14.7 MPa 0.2 For 9.8 MPa For 9.8 MPa For 4.9 MPa 0.1 For 4.9 MPa 0 25 50 75 100 0 50 100 150 200 250 300 Flow rate (L/min) Pressure (MPa) Flow rate (L/min) RBP30 RBP35 Pressure (MPa) 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 For 24.5 MPa, 30.9 MPa, and 34.3 MPa For 14.7 MPa For 9.8 MPa For 4.9 MPa 50 100 150 200 250 300 350 400 450 500 Flow rate (L/min) Pressure (MPa) 2.0 1.6 1.2 0.8 0.4 0 For 24.5 MPa, 30.9 MPa, and 34.3 MPa For 14.7 MPa For 4.9 MPa For 9.8 MPa 100 200 300 400 500 600 700 Flow rate (L/min) 6-7

■Dimension drawing ●RBP10, 20, 30P-10/*-E B C L7 B1 B2 X P T Emergency manual adjustment screw L8 L1 L2 L3 L4 Max. 17.5 (Use length of 16.5 to 17.5 mm) (It will drop out if excessively be moved backward) Solenoid proportional balanced piston type relief valve 10 ●RBP 20P-10/*-EE 30 In case of electric connection symbol B (DIN connector GDM3011) MAX.L6 194 52 98 H1 78 L10 M5 φ13 X L5 P 4 Y T 26 198 Maximum pressure limiting device Screw depth 12 (With plastic plug) φ6 D2 Locating pin L9 D3 4-D1 Tightening torque #10 (M12) 98±15 N・m (1000±150 kgf・cm) #20 (M16) 235±35 N・m (2400±360 kgf・cm) #30 (M18) 333±50 N・m (3400±510 kgf・cm) L7 G 1 4 In case of electric connection symbol C (DIN large connector GDME3011) Air bleeding plug PG11 (Cable outer diameter 8 to 10mm) B1 B2 X P T 45 Emergency manual adjustment screw L8 L1 L2 L3 L4 MAX.L6 Max. 17.5 (Use length of 16.5 to 17.5 mm) (It will drop out if excessively be moved backward) Cable grounding ISO228-G1/2 (Outer diameter of connection cable φ6 to φ13) 52 L10 L5 193 98 78 Y G 1 4 Air bleeding plug Maximum pressure limiting device Screw depth 12 (With plastic plug) X P T 26 H1 M5 φ13 4 φ6 D2 L9 D3 4-D1 Tightening torque #10 (M12) #20 (M16) #30 (M18) Locating pin 98±15 N・m (1000±150 kgf・cm) 235±35 N・m (2400±360 kgf・cm) 333±50 N・m (3400±510 kgf・cm) Nominal dimension B1 B2 D1 D2 D3 L1 L2 L3 L4 L5 10 78 54 M12 12 20 23.5 22.1 47.6 54 99.5 20 100 69.8 M16 25 35 34 11.1 55.6 66.7 112.7 30 115 82.5 M18 31 40 41.5 12.7 76.2 88.9 122.9 *The symbol (-) indicates that the dimension shown is measured in the outside position. L6 251 265 275 L7 90 117 148 L8 0 23.8 31.7 L9 22.1 33.3 44.4 L10 *-7.5 5.7 15.9 H1 19 24 24 O-ring JIS B2401 P and T ports T port P16,Hs 90 P10,Hs 90 G30,Hs 90 P10,Hs 90 G35,Hs 90 P10,Hs 90 6-8

Pressure override characteristics (viscosity 25 mm 2 /s (cSt))<br />

RBP<strong>10</strong><br />

RBP20<br />

Pressure (MPa)<br />

35<br />

30<br />

25<br />

20<br />

15<br />

<strong>10</strong><br />

5<br />

For 34.3 MPa<br />

For 30.9 MPa<br />

For 24.5 MPa<br />

For 14.7 MPa<br />

For 9.8 MPa<br />

For 4.9 MPa<br />

Pressure (MPa)<br />

35<br />

30<br />

25<br />

20<br />

15<br />

<strong>10</strong><br />

5<br />

For 30.9 MPa, 34.3 MPa<br />

For 24.5 MPa<br />

For 14.7 MPa<br />

For 9.8 MPa<br />

For 4.9 MPa<br />

0<br />

25<br />

50 75<br />

Flow rate (L/min)<br />

<strong>10</strong>0<br />

0<br />

50 <strong>10</strong>0 150 200 250 300<br />

Flow rate (L/min)<br />

RBP30<br />

RBP35<br />

Pressure (MPa)<br />

35<br />

30<br />

25<br />

20<br />

15<br />

<strong>10</strong><br />

5<br />

0<br />

For 30.9 MPa, 34.3 MPa<br />

For 24.5 MPa<br />

For 14.7 MPa<br />

For 9.8 MPa<br />

For 4.9 MPa<br />

35<br />

For 30.9 MPa, 34.3 MPa<br />

30<br />

For 24.5 MPa<br />

25<br />

20<br />

For 14.7 MPa<br />

15<br />

For 9.8 MPa<br />

<strong>10</strong><br />

For 4.9 MPa<br />

5<br />

50 <strong>10</strong>0 150 200 250 300 350 400 450 500<br />

0 <strong>10</strong>0 200 300 400 500 600 700<br />

Flow rate (L/min)<br />

Flow rate (L/min)<br />

Minimum adjustment pressure characterisitcs (viscosity 25 mm 2 /s (cSt)) Input current: 0<br />

Pressure (MPa)<br />

Solenoid proportional balanced piston type relief valve<br />

RBP<strong>10</strong><br />

RBP20<br />

Pressure (MPa)<br />

0.8<br />

0.8<br />

0.7<br />

0.6<br />

0.6<br />

For 24.5 MPa, 30.9 MPa, and 34.3 MPa<br />

0.5<br />

For 24.5 MPa, 30.9 MPa, and 34.3 MPa<br />

For 14.7 MPa<br />

0.4<br />

0.4<br />

0.3<br />

0.2<br />

For 14.7 MPa<br />

0.2 For 9.8 MPa<br />

For 9.8 MPa<br />

For 4.9 MPa<br />

0.1 For 4.9 MPa<br />

0 25 50 75 <strong>10</strong>0 0 50 <strong>10</strong>0 150 200 250 300<br />

Flow rate (L/min)<br />

Pressure (MPa)<br />

Flow rate (L/min)<br />

RBP30<br />

RBP35<br />

Pressure (MPa)<br />

1.8<br />

1.6<br />

1.4<br />

1.2<br />

1<br />

0.8<br />

0.6<br />

0.4<br />

0.2<br />

0<br />

For 24.5 MPa, 30.9 MPa, and 34.3 MPa<br />

For 14.7 MPa<br />

For 9.8 MPa<br />

For 4.9 MPa<br />

50 <strong>10</strong>0 150 200 250 300 350 400 450 500<br />

Flow rate (L/min)<br />

Pressure (MPa)<br />

2.0<br />

1.6<br />

1.2<br />

0.8<br />

0.4<br />

0<br />

For 24.5 MPa, 30.9 MPa, and 34.3 MPa<br />

For 14.7 MPa<br />

For 4.9 MPa<br />

For 9.8 MPa<br />

<strong>10</strong>0 200 300 400 500 600 700<br />

Flow rate (L/min)<br />

6-7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!