DH6/10

Temperature and pressure compensated flow regulating valve (1)
FJC5to16
Overview
This temperature and pressure
compensated flow regulating valve controls
the flow rate of the hydraulic circuit to be
constant regardless of change in pressure
and temperature and allows for precise
speed control of the actuator.
Type indication
Features
1. As the restriction part is of sharp-edged
orifice structure, high-precision
temperature compensation can be
obtained.
2. To prevent a jumping phenomenon that
occurs at the time of startup of the
actuator, a jumping prevention device can
be installed.
3. A wide variety of types of maximum
regulated flow rate are available, optimum
control can be performed.
4. As the handle key is adopted for the
adjusting part, the flow rate does not
change even if you touch the handle by
mistake other than during adjustment.
Temperature and pressure compensated flow regulating valve (1)
Temperature and pressure compensated
flow regulating valve
Nominal dimension
5, 10, 16
Connection method
Gasket connection type
Series number:
Shape of adjustment part
3 = Handle with key adjustment
Hydraulic symbols
Nominal dimension 5
Nominal dimension 10, 16
= 10
= 11
Presence/absence of jumping prevention device
No symbol
J
Type of hydraulic oil
No symbol
Mineral based hydraulic oil
V Phosphate ester based hydraulic oil
W Fatty ester based hydraulic oil
Water-glycol based hydraulic oil
= Without jumping prevention device
= With jumping prevention device
Maximum regulated flow rate symbol
Nominal dimension
Maximum
regulated flow rate
(L / min)
Option
A temperature and pressure compensated flow regulating valve
with a lever in which only the operating part shape is different can be manufactured.
Type indicationAdd -C01 to the end. (10 and 16 size only)
3-22