A numerical study on the thermal expansion coefficients of fiber
A numerical study on the thermal expansion coefficients of fiber A numerical study on the thermal expansion coefficients of fiber
75 Shen, Y.L. (1998). Thermal Expansion of Metal-Ceramic Composites: A Three Dimensional Analysis. Materials Science and Engineering A, 252, 269-275. Sideridis, E. (1994). Thermal expansion coefficient of fiber composites defined by the concept of the interphase. Composites Science and Technology, 51, 301-317. Technical note 69: Principles of Push-Rod Dilatometry, (n.d.). Retrieved July 11, 2005 from http://www.anter.com/TN69.htm Thermal expansion (n.d) Retrieved July 11, 2005 from http://www.pmiclab.com/testing/ThermalExpansion.html Tantina, G., Nimmer, R., (1994). Structural analysis of thermoplastic components. Malnati P. (Ed.). New York: McGraw-Hill, Inc. Tsai, S.W., & Hahn, H. T. (1980). Introduction to composite materials. Lancester: Technomic Publishing Co. Inc. Wypych G. (2000). Handbook of fillers (2nd ed.). Toronto: ChemTec Publishing. Van Fo Fy, G. A. (1965). Thermal strains and stresses in glass fiber reinforced media (in Russian). Prikl. Mekh. Teor. Fiz., 101. Van Fo Fy, G. A., & Savin G. N. (1965). Fundamentals of the theory of non-fabric glass reinforced plastics (in Russian). Mekhanika Polimerov, 1, 151. Van Fo Fy, G. A. (1966). Elastic constants and thermal expansion of certain bodies with inhomogeneous regular structure (in Russian). Soviet Physics, Doklady, 11, 176. Van Fo Fy, G. A. (1966). Basic relations of the theory of oriented glass reinforced plastics with hollow fibers (in Russian). Mekhanika Polimerov, 2, 763.
- Page 33 and 34: 24 (orthorhombic) of polyethylene h
- Page 35 and 36: 26 Whiskers are monocrystalline sho
- Page 37 and 38: 28 3.2 Factors Affecting the Coeffi
- Page 39 and 40: 30 3.2.4 Thermal Cycling The primar
- Page 41 and 42: 32 3.3.1 Mechanical Dilatometry Thi
- Page 43 and 44: 34 absolute accuracy of about ± 0.
- Page 45 and 46: 36 3.3.3 Strain Gauges This relativ
- Page 47 and 48: 38 • The composite is macroscopic
- Page 49 and 50: 40 3.4.1.3 Equation of Van Fo Fy In
- Page 51 and 52: 42 and the thermal expansion coeffi
- Page 53 and 54: 44 P P 11 33 2 A 22 − A = Det A A
- Page 55 and 56: 46 • A perfect bonding exists at
- Page 57 and 58: CHAPTER FOUR FINITE ELEMENT METHOD
- Page 59 and 60: 50 No matter how the geometry is cr
- Page 61 and 62: 52 displacements and/or rotations a
- Page 63 and 64: CHAPTER FIVE MICROMECHANICAL ANALYS
- Page 65 and 66: 56 5.2 Mesh Creation 10-node tetrah
- Page 67 and 68: 58 carbon fibers were assumed to ha
- Page 69 and 70: 60 Figure 5.6 The displacement fiel
- Page 71 and 72: 62 small differences between these
- Page 73 and 74: 64 Table 6.1 Comparison of the expe
- Page 75 and 76: 66 Longitudinal CTE (1/°C) 2.25E-0
- Page 77 and 78: 68 Longitudinal CTE (1/°C) 2.00E-0
- Page 79 and 80: 70 Longitudinal CTE (1/°C) 4.00E-0
- Page 81 and 82: 72 Longitudinal CTE (1/°C) 1.00E-0
- Page 83: 74 Ishikava, T., Koyama, K., & Koba
75<br />
Shen, Y.L. (1998). Thermal Expansi<strong>on</strong> <strong>of</strong> Metal-Ceramic Composites: A Three<br />
Dimensi<strong>on</strong>al Analysis. Materials Science and Engineering A, 252, 269-275.<br />
Sideridis, E. (1994). Thermal expansi<strong>on</strong> coefficient <strong>of</strong> <strong>fiber</strong> composites defined by<br />
<strong>the</strong> c<strong>on</strong>cept <strong>of</strong> <strong>the</strong> interphase. Composites Science and Technology, 51, 301-317.<br />
Technical note 69: Principles <strong>of</strong> Push-Rod Dilatometry, (n.d.). Retrieved July 11,<br />
2005 from http://www.anter.com/TN69.htm<br />
Thermal expansi<strong>on</strong> (n.d) Retrieved July 11, 2005 from<br />
http://www.pmiclab.com/testing/ThermalExpansi<strong>on</strong>.html<br />
Tantina, G., Nimmer, R., (1994). Structural analysis <strong>of</strong> <strong>the</strong>rmoplastic comp<strong>on</strong>ents.<br />
Malnati P. (Ed.). New York: McGraw-Hill, Inc.<br />
Tsai, S.W., & Hahn, H. T. (1980). Introducti<strong>on</strong> to composite materials. Lancester:<br />
Technomic Publishing Co. Inc.<br />
Wypych G. (2000). Handbook <strong>of</strong> fillers (2nd ed.). Tor<strong>on</strong>to: ChemTec Publishing.<br />
Van Fo Fy, G. A. (1965). Thermal strains and stresses in glass <strong>fiber</strong> reinforced media<br />
(in Russian). Prikl. Mekh. Teor. Fiz., 101.<br />
Van Fo Fy, G. A., & Savin G. N. (1965). Fundamentals <strong>of</strong> <strong>the</strong> <strong>the</strong>ory <strong>of</strong> n<strong>on</strong>-fabric<br />
glass reinforced plastics (in Russian). Mekhanika Polimerov, 1, 151.<br />
Van Fo Fy, G. A. (1966). Elastic c<strong>on</strong>stants and <strong>the</strong>rmal expansi<strong>on</strong> <strong>of</strong> certain bodies<br />
with inhomogeneous regular structure (in Russian). Soviet Physics, Doklady, 11,<br />
176.<br />
Van Fo Fy, G. A. (1966). Basic relati<strong>on</strong>s <strong>of</strong> <strong>the</strong> <strong>the</strong>ory <strong>of</strong> oriented glass reinforced<br />
plastics with hollow <strong>fiber</strong>s (in Russian). Mekhanika Polimerov, 2, 763.