CAN 2.0A/B ↔ RS232/RS485 Converter

Befehl
I
Ixxx(CR)
or
Ixxxxxxxx(CR)
Funktion
Identifier in Hex (000...7FF)
11 Bit Standard Format
or
Identifier in Hex (00000000...1FFFFFFF) 29 Bit Extended Format
L Lx(CR) Listen Mode Only (0...1)
This setting determines whether only 11-bit or 11-bit and 29-bit are
accepted by CAN-Acceptance-Code and CAN-Acceptance-Mask.
Response: “List of parameters: (CR)OK(CR)” or “ERROR(CR)“
0 – CAN Normal Mode (read and write)
1 – CAN Listen Only Mode (listening only, read)
Response: “List of parameters: (CR)OK(CR)” or “ERROR(CR)“
A Axxxxxxxx(CR) CAN-Acceptance-Code x = (0...000007FF) 11 Bit Standard Format
CAN-Acceptance-Code x = (0...1FFFFFFF) 29 Bit Extended Format
x = 0 receives all CAN-Frames
Response: “List of parameters: (CR)OK(CR)” or “ERROR(CR)“
M Mxxxxxxxx(CR) CAN-Acceptance-Mask x = (0..000007FF) 11 Bit Standard Format
CAN-Acceptance-Mask x = (0..1FFFFFFF) 29 Bit Extended Format
R
V
N
R0(CR)
R1(CR)
R2(CR)
R3(CR)
R4(CR)
R5(CR)
R6(CR)
R7(CR)
R8(CR)
R9(CR)
RA(CR)
RB(CR)
RC(CR)
RD(CR)
RE(CR)
RF(CR)
x = F receives all CAN-Frames
Response: “List of parameters: (CR)OK(CR)” or “ERROR(CR)“
600 bps RS232/RS485 Baudrate (all 8 N 1)
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
230000 bps
500000 bps
600000 bps
750000 bps
1000000 bps
1500000 bps
3000000 bps Other baud rates available on request
Response: “ (CR)OK(CR)” or “ERROR(CR)”
Software Version Number
Response: „Software Version: x.x(CR)“
Converter Nummer
x = 0..F
Response: „Converter-ID: xxxx xxxx(CR)“ x= 0..F