RYOBI 3200pcx-E-6p210 - Ferrostaal

Specifications RYOBI 3200PCX
Standard Equipment
Number of printing units
Max. paper size
Min. paper size
Max. printing area
Paper thickness
Printing speed *1
Plate size
Plate clamp systems
2
340 x 450 mm (13.39" x 17.72")
90 x 130 mm (3.54" x 5.12")
When printing minimum paper size sheets,all 12 skid rollers have to be used.
317 x 438 mm (12.48" x 17.24")
0.04 _ 0.3 mm (0.0016" _ 0.012")
3,000 _ 10,000 sheets per hour (Stepless)
When using the paper master tail edge holder,
plate length should be from 467 to 473 mm (18.39" _ Pin bar type: 324 x 492 mm (12.76" x 19.37")(for metal plate)
Straight type: 326 x 492 mm (12.83" x 19.37")(for paper master)
18.62")
For metal plates
For paper master type
Pin bar type, 25 holes, 12.7 mm (0.5") pitch
Straight edge plate clamp
Blanket type
Blanket size
Feeding system
Feeder pile capacity
Feeder pile system
Delivery system
Delivery pile capacity
Number of ink rollers
Dampening system *2
Blanket with aluminum bars
319 x 494 x 1.95 mm (12.56" x 19.45" x 0.077")
Universal feeder
620 mm (24.41")
Pre-pile
Direct chain delivery
720 mm (28.35")
12 (form rollers: 2) x 2 units
Crestline continuous dampening system
Gripper margin
Registration system
Vertical image adjustment
Lateral image adjustment
Oiling system
*1
Number of dampening rollers
Primary unit: 5 (form roller: 1)
Secondary unit: 6 (form roller: 1)
8 mm (0.31")
Push guide
±20 mm (0.79")
±2 mm (0.079")
Centralized oiling system
Power
Single phase: 220V 50/60Hz 10A
240V 50Hz 10.5A (Transformer is required.)
Power consumption
Motor wattage
Dimensions (L x W x H)
Net weight *3
2kW
Main drive: 1.5kW Pump: 550W
2,160 x 930 x 1,480 mm (7'1" x 3'1" x 4'10")
1,080 kg (2,380 lbs)
*1: The local conditions, ink, stock, type of printing plates, and required printing quality all affect the maximum printing speed.
*2: Recommended pressroom environment
*3:
_ Temperature: 15˚C-28˚C (59˚F-82.4˚F ), Humidity: 40%-80%
Weight does not include peripheral devices.
Design and specifications are subject to change without notice.
The specifications may differ slightly depending on the country.
GRAPHIC SYSTEMS DIVISION:
800-2 UKAI-CHO, FUCHU, HIROSHIMA 726-0002, JAPAN
TEL. 81-847-40-1600, FAX. 81-847-40-1601
RYOBI home page. http://www.ryobi-group.co.jp/
Automatic master insertion and ejection
Automatic blanket cleaning and drying
Continuous paper master feeding and printing
Plate register remote control device (vertical, lateral)
Paper feed timing delay detector
Double sheet detector and ejector
Blanket jam detector
Infeed jam detector
Delivery air blower
Delivery fans
Delivery table dolly automatic lowering device
Delivery table dolly lower limit switch
Static eliminator
Crawl function
Preset repeat counter
Print counter (Total number of sheets printed)
Machine counter (Total number of machine rotations)
Plate counter (Total number of paper masters used)
Oil warning lamp
Powder spray device
Safety covers
Emergency stop button
Squeeze roller
Back guide star wheel
Paper pile board
Paper delivery table dolly
Ink roller cleanup attachment
Plunger can
Oil pan
Tools
Optional Equipment
Blanket cleaning device with cleaning solution
circulation system
Tape inserter
Multi-size paper pile board
Copyright © 2006 RYOBI Limited
Cat.No.3200PCX/AUTO Oct.'06 E01 HB10
Order No. H5332 01 01
Printed in Japan